Pro-Form 590 LT Operation & User’s Manual

Serial No. Write the serial number in the space above for reference. CAUTION Read all precautions and instruc- tions in this manual before using this equipment. Save this manual for future reference. QUESTIONS? If you have questions, or if parts are damaged or missing, DO NOT CONTACT THE STORE; please contact Custome ...

IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 BEFORE YOU BEGIN. . . . . . . . . . . . . . . . . . ...

consult your physician. This is especially important for persons over age 35 or persons with pre-existing health problems. 2. It is the responsibility of the owner to ensure that all users of this treadmill are adequately informed of all warnings and precautions. Use the treadmill only as described. 3. Place the tr ...

is running. Always remove the key, unplug the power cord, and press the power switch into the off position when the treadmill is not in use. (See the drawing on page 5 for the location of the power switch.) 20. Do not attempt to raise, lower, or move the treadmill until it is properly assembled. (See ASSEMB ...

CROSSWALK 590 LT treadmill. The CROSSWALK 590 LT treadmill offers a selection of features designed to make your workouts at home more enjoyable and effective. And when you’re not exercising, the unique treadmill can be folded up, requiring less than half the floor space of other treadmills. For your benefit, read ...

Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Note: After shipping, there may be an oily sub- stance on the exterior of the treadmill ...

With the help of a second person, carefully tip the treadmill onto its left side. Partially fold the Frame (57) so that the treadmill is more stable; do not fully fold the Frame yet. Remove and discard the two indicated screws (A) and the shipping bracket (B). Cut the shipping tie securing the Wire Harness ...

Bolt (26), and the shipping bracket (C) from the Base (99). Attach a Wheel (95) with the Bolt and the Locknut that you just removed. Do not overtighten the Locknut; the Wheel must turn freely. Discard the shipping bracket. 3 26 36 C 95 99 4. Identify the Right Upright (80) and the Right Upright Spacer (90), ...

91 99 6 7. With the help of a second person, carefully tip the treadmill onto its right side. Partially fold the Frame (57) so that the treadmill is more stable; do not fully fold the Frame yet. Remove and discard the two indicated screws (A) and the shipping bracket (B). Remove the M10 Locknut (36), the M10 ...

of the Left Upright (79). Insert an M10 x 96mm Screw (7) with an M10 Star Washer (8) into the Left Upright and the Screw Spacer. Repeat this step with a second Screw Spacer (98), M10 x 96mm Screw (7), and M10 Star Washer (8). Orient the Left Upright Spacer (89) and the Left Upright (79) as shown. Hold the ...