Erbauer ERB905D Operation & User’s Manual

product develops a fault within this period, you should in the first instance contact Screwfix Direct Ltd on Freephone 0500 41 41 41. If the fault occurs within the first 24 months, you may return the goods for a full refund or we will repair or replace the ...

may result in electric shock, fire and/or serious injury. SAVE THESE INSTRUCTIONS 1. WORK AREA a. Keep work area clean and well lit. Cluttered and dark areas invite accidents. b. Do not operate power tools in explosive atmospheres, such as in the presence o ...

g. If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of these devices can reduce dust-related hazards. 4. POWER TOOL USE AND CARE a. Do not force the power tool. Use the correct power tool for your application. The co ...

6.Wear eye protection when operating this tool. 7.The base plate must always be held firmly against the material being cut to reduce vibration and blade jumping. 8.If possible, ensure the workpiece is firmly clamped to prevent movement. 9.Your Planer is a hand held tool, do not ...

2. LOCK-OFF SWITCH 3. HAND GRIP AREAS 4. CUTTING DEPTH ADJUSTER 5. EXTRACTION OUTLET 6. BASEPLATE STAND (See Fig 5) 7. BLADE CLAMP (See Fig 6) 8. BLADE (See Fig 6) 9. GUARD (See Fig 6) 10. HEIGHT ADJUSTMENT SCREWS (See Fig 6) 11. BELT COVER 12. SMALL PULLEY (See Fig 7) 13. LARGE PULLEY (See Fig 7) 14. BASEPLATE 15. V-GROOVE 16. RE ...

Power input: 900W No load speed: ...

Your switch is locked off to prevent accidental starting. Depress lock off button (2) then on/off switch (1) and release lock off button (2). Your switch is now on. To switch off just release the on/off switch (See Fig 1). 2. HAND GRIP AREAS Always hold your planer firmly with both hands when operat ...

Holding the blade clamp (7) in position, using a piece of wood slides the blade (8) out of the blade clamp (7) and depress the guard (9) to remove the blade from the blade clamp. Note: there is no need to remove the blade clamp (7) as this can change the factory settings for cutting blade heigh ...