Extech Instruments DT200 Operation & User’s Manual

measures Distance up to 35m (115’) and calculates Area and Volume. In addition, the DT200 includes a laser pointer for accurate targeting. This meter is shipped fully tested and calibrated and, with proper use, will provide yea ...

3. LCD display area 4. Keypad (described below) 5. Battery compartment on rear of instrument Display 1. Laser Status icon appears when laser is active 2. Reference level (Top) 3. Reference Level (Bottom) 4. Area, Volume, and Indirect Measurement icons 5. Single Distan ...

2. Use a section of cardboard or similar material if the target size needs to be increased 3. Replace the battery if the battery icon appears on the display 4. The meter will not measure through glass, liquid, or Styr ...

This mode of operation is useful for determining the shortest and longest distances from a given point. 1. Press the MEAS button to switch the meter ON. 2. Press and Hold the MAX/MIN button for 3 seconds to begin a continuous measurement session. 3. The meter will beep with each new measurement up ...

1. Press the MEAS button to switch the meter ON. Wait several seconds and the Laser pointer will automatically switch ON. 2. Press the button firmly twice (allow a second or so between presses). 3. A cube shape will appear with its Length side flashing indicating ...

The DT200 can measure height in two segments by taking three measurements. The operator stands at Point X. The first measurement is Point X to 1, the second measurement is a horizontal line from Point X to 2, and the third measurement is from Point X to 3. 1. Press the MEAS button to ...

The DT200 stores up to twenty (10) readings in memory for later recall. 1. Take a reading as previously described. 2. With the reading displayed, press the button. 3. The reading will be stored in location 1. 4. Take another reading press the store button. This new reading will be stored in location 1 ...

securely. This instrument is designed to provide years of dependable service, if the following care instructions are performed: 1. Keep the meter dry and free from dust. 2. Use and store the meter in nominal temperature conditi ...

Battery Two (2) ‘AAA’ alkaline batteries Dust/Splash Proof IP 54 Operating conditions 32 to 104°F (0 to 40°C) Storage conditions 14 to 140°F (-10 to 60°C) Dimensions 4.5 x 1.9 x 1.1” (115 x 48 x 28mm) Weight 5.3 oz. (150g) Recommended ...