Brinkmann BARREL SMOKER Owner's Manual

NOTICE TO INSTALLER: LEAVE THESE INSTRUCTIONS WITH THE GRILL OWNER FOR FUTURE REFERENCE. OWNER’S MANUAL ASSEMBLY AND OPERATING INSTRUCTIONS WARNING READ AND FOLLOW ALL WARNINGS AND INSTRUCTIONS IN THIS MANUAL TO AVOID PERSONAL INJURY OR PROPERTY DAMAGE. MANUAL DEL PROPIETARIO INSTRUCCIONES DE ARMADO Y OPERACIÓN SA ...

the grill. Never use on wooden or other surfaces that could burn. • DO NOT use grill without charcoal tray in place. DO NOT attempt to remove charcoal tray while tray contains hot coal. • Proper clearance of 10 ...

the flame. Do not use water to extinguish grease fires. • Use caution since flames can flare-up when fresh air suddenly comes in contact with fire. When opening the lid, keep hands, face and body a safe distance fro ...

1 Lid 1 Smokestack 1 Smokestack Bracket 1 Temperature Gauge 1 Lid Handle with Heat Shield 2 Cooking Grills 1 Warming Rack 1 Fire Box 2 Charcoal Grate Adjusters 1 Charcoal Grate 1 Ash Tray 1 Ash Tray Handle 2 Upper Legs 4 Lower Legs 1 Shelf 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 ASSEMBLY INSTRUCTIONS READ ALL SAFETY WARNINGS & ASSEMBLY INSTR ...

6 M6 X 12 mm Bolts 10 M6 X 40 mm Bolts 2 M6 X 25 mm Shoulder Bolts 16 M6 Nuts 4 Cotter Pins 5 4 3 2 1 1 2 3 5 4 INSTR_810-3000-S.qxd 1/8/10 4:35 PM Page 5 ...

friend to help you put your grill together. Lay cardboard down to protect grill finish and assembly area. Turn the grill on its side to begin assembly. Step 1 Attach upper legs to firebox of grill using six M6 X 40 mm bolts and six M6 nuts. Step 2 Insert lower legs into upper legs, making sure the holes for th ...

M6 X 12 mm bolts and two M6 nuts. Step 5 To Install the temperature gauge insert into center hole on grill lid, then turn it clockwise to upright position. Attach smokestack to smokestack bracket as shown. Step 6 Attach lid handle with heat shield to lid using two M6 X 12 mm bolts and two M6 nuts. INSTR_810 ...

M6 X 25 mm shoulder bolts and cotter pins. Step 8 Hang the charcoal grates in the firebox as shown. Step 9 Insert warming rack through holes in grill lid and then insert the warming rack legs through the holes in the grill bottom. Secure using two cotter pins. INSTR_810-3000-S.qxd 1/8/10 4:35 PM Page 8 ...

Step 11 Attach the ash tray handle with two M6 X 12 mm bolts and two M6 nuts. Step 12 Insert the ash tray into the brackets as illustrated. INSTR_810-3000-S.qxd 1/8/10 4:35 PM Page 9 ...