BMB R 1200 RT Руководство пользователя

BMB R 1200 RT mark: Top up the engine oil ( 110). If the oil level is above the MAX mark: Have the oil level corrected by a specialist workshop, preferably an authorised BMW Motorrad dealer. Top up the engine oil Make sure the ground is level and firm and place the motor- cycle on its stand. Wipe the area around the filler neck clean. Use ...

ganisation of BMW Motorrad. The specialists will provide the necessary advice and assistance. You will find important country- specific contact addresses and the after-sales service organisa- tion phone numbers in the "Ser- vice Kontakt / Service Contact" brochures, along with informa- tion on Mobile Service and the dealership ...

BMB R 1200 RT Threaded fasteners . . . . . . . . . . . . . . . . 145 Engine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147 Fuel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148 Engine oil . . . . . . . . . . . . . . . . . . . . . . . . . . 148 Clutch . . . . ...

BMB R 1200 RT Disengage the latch and dis- connect plug 2. Remove the rear seat and place it, upholstered side down, on a clean surface. Remove the front seat Remove the rear seat ( 74). Lift the rear of the front seat. with seat heatingOE Disengage the latch and dis- connect plug 3. Remove the front seat and place it, upholstered side down, on a clean ...

ated. If you install the seat in the low position, check that the seat's rubber buffers 5 are in the bot- tom positions in mounts 6. Firmly press the front seat into the mounts. Install the rear seat ( 76). Install the rear seat Installing front seat ( 75). with seat heatingOE Connect plug 2. Slide the rear seat underneath the ...

150 Brakes . . . . . . . . . . . . . . . . . . . . 152 Wheels and tyres. . . . . . . . . . 152 Electrics . . . . . . . . . . . . . . . . . . . 153 Frame . . . . . . . . . . . . . . . . . . . . . 154 Dimensions . . . . . . . . . . . . . . . 155 Weights . . . . . . . . . . . . . . . . . . . 156 Riding specifications . . ...