CTC Union PHB-200 Operation & User’s Manual

CTC Union Technologies Co., Ltd. Far Eastern Vienna Technology Center (Neihu Technology Park) 8F, No. 60 Zhouzi St. Neihu District Taipei 114 Taiwan Tel: +886‐2‐26591021 Fax: +886‐2‐27991355 Email: [email protected] [email protected] URL: http://www.ctcu.com PHB‐200 User Manual Fiber Managed Gigabit Ethernet Media Converter  ...

publication.  CTC  Union  Technologies  assumes  no  responsibility,  however,  for  possible  errors  or  omissions,  or  for  any consequences resulting from the use of the i ...

i Chapter 1  Introduction ................................................................................................................................................................. 7 1.0 Introduction ................................................................................................................................... ...

Chapter 1 Introduction 1.0 Introduction Thank you for choosing PHB-200 Gigabit Ethernet Fiber Media Converter Concentrator Rack. If you would like to skip right to the installation of the Converter Chassis, proceed to Chapters 2. This manual is used to explain the hardware installation and provisioning procedures for PHB-200, and pre ...

1.2 Chassis Front Description The front of PHB-200 has the SFP cages and RJ-45 pairs for each of the independent fiber media converters. Status LEDs provide real time state of fiber and UTP links. The DB9 female console port is RS-232 DCE for direct connection to PC COM port with 1:1 cable. This provides an easy to use 'menu system' f ...

1.2.1.3 Chassis Status There are currently 5 functional LEDs in this group with one LED reserved for future use. Below please find a description for each of these LEDs. LED Color State Description ON Supply is working normally PWR1 GREEN ON No power, powered off or no supply ON Supply is working normally PWR2 GREEN OFF No� ...

1.3 Chassis Rear Description The rear panel provides the power input connections (AC+DC chassis shown). Alarm relay contacts are available via a screw terminal block. Alarm Relay Contacts Terminal Strip  for DC Power Power Module 1 AC Type Shown Power Module 2 DC Type Shown IEC AC Mains Input Input Power Switch Input ...