Record Power BS12 Original Instruction Manual

Original Instruction Manual IMPORTANT For your safety read instructions carefully before assembling or using this product. Save this manual for future reference. Version 2.0 February 2012 Telephone: 01246 561 520 Fax: 01246 561 537 Record Power Ltd Unit B, Adelphi Way Staveley S43 3LS Email: sales@recordpowe ...

Contents WARNING: This product is heavy and as a precaution it is advised that two people assemble the machine. Consumable Spare Parts Quick Find 1. Health & Safety Guidance 2. Additional Health & Safety for 12" Bandsaws 3. Record Power Guarantee 4. Getting to Know You ...

1. Health & Safety Guidance READ ALL THE INSTRUCTIONS IN THIS MANUAL CAREFULLY BEFORE ASSEMBLY, INSTALLATION AND USE OF THIS PRODUCT. KEEP THESE INSTRUCTIONS IN A SAFE PLACE FOR FUTURE REFERENCE. WARNING: When using power tools, basic safety precautions should always be followed to reduce the risk of fire, e ...

SAFETY IS A COMBINATION OF OPERATOR COMMON SENSE AND ALERTNESS AT ALL TIMES WHEN THE BANDSAW IS BEING USED. WARNING: FOR YOUR OWN SAFETY, DO NOT ATTEMPT TO OPERATE YOUR BANDSAW UNTIL IT IS COMPLETELY ASSEMBLED AND INSTALLED ACCORDING TO THE INSTRUCTIONS. SAFE OPERATION ...

3. Record Power Guarantee 1.  Introduction 1.1  We supply machinery through a network of dealers and authorised distributors and you should be aware that your contract of sale is with the retailer from whom you purchased this product. 1.2  If you are not satisfied with this product you should in the fir ...

4. Getting to Know Your Bandsaw A Blade Tensioning Knob B Rise & Fall Knob C Blade D Upper Blade Guide E Table F Rip Fence G Rip Fence Rail H Table Tilt Lock Handle I Stand & Wheel Kit J Belt Tension & Speed Change Handle K Blade Tracking Knob L Table Tilting Knob M Mo ...

6. Stand & Wheelkit Assembly Stand & Wheel Kit Assembly The stand and wheel kit comes as a self assembly unit. Stand A. Upper Frame B. Long mid brace supports x2 C. Short mid brace supports x2 D. Legs x4 Stand fixing nuts bolts and washers (each) x22 WheelKit E. Hex bolt x8 F. Fixed wheels x2 G. Tubular ...

6. Stand & Wheelkit Assembly - Cont. 8 Stand Assembly 1. Locate the four legs (E) and secure them to the upper frame (A) using the nuts, bolts and washers supplied. 2. Locating holes a third of the way down each leg are for securing the long mid brace supports (C). F ...

9 6. Stand & Wheelkit Assembly - Cont. Wheelkit Assembly Attach the fixed wheels (G) to the front legs (E) of the stand using the M6x16 hex bolts, Washers, and M6 Nyloc nuts provided. Note: For your safety only use the handle to pull the machine. It is unsafe to push the machine using the handle. When liftin ...

10 6. Stand & Wheelkit Assembly - Cont. Fitting the Bandsaw to the Stand 1. Lift the bandsaw over the stand. and place the long fixing bolts through the four location holes in the bandsaw base. 2. Secure the bandsaw to the stand with the remaining washers and nuts. C ...