-
Table of Contents
2
-
AAON® CL Series Features and Options Introduction
5
-
Unit contains fans with moving parts
7
-
Do not use oxygen, acetylene or air in
8
-
Do not work in an enclosed area
9
-
1. Startup and service must be performed by
10
-
CL Series Feature String Nomenclature
11
-
All AAON CL Series condensers are factory
14
-
A complete set of unit specific wiring diagrams in
15
-
For roof mounted applications or anytime
16
-
Low Ambient & Modulating Reheat System
17
-
9. Attach the micron gauge to the system on
18
-
Checking Liquid Sub-cooling:
19
-
Special Low Ambient Charging Instructions:
20
-
The LAC valve is a non-adjustable three way
21
-
Power wiring is to the unit terminal block or main
23
-
Refrigerant Piping Connections:
24
-
After the installation and immediately before the
26
-
Axial Flow Fans:
27
-
Step 5. Final Assembly
28
-
SERVICING AND MAINTENANCE
29
-
Refrigerant Liquid Line Filter Driers:
30
-
EVAPORATIVE CONDENSER - GENERAL
31
-
Improper location of the evaporative condenser
32
-
2. Record pressure gauge readings for future
33
-
Water Treatment System:
34
-
EVAPORATIVE CONDENSER -
35
-
and PVC is the only acceptable means of cleaning
36
-
and dirt into the coil. This will make cleaning
37
-
may be beneath any soils, grease or dirt;
38
-
REFRIGERANT PIPING FOR THE
39
-
Liquid line sizing:
40
-
length) to maintain oil flow towards the
41
-
sections. This will however require additional
42
-
Discharge lines must be sized to ensure adequate
43
-
CL STARTUP FORM PAGE 1 of 2
54
-
CL STARTUP FORM PAGE 2 of 2
55
-
AAON E-Coated Coil Maintenance Record
57
-
Literature Change History
58
-
2425 South Yukon Ave.
60
