BigTimeClocks 280 Manuals

!1 MODEL #280 12” NUMERALS WATERPROOF GPS WALL CLOCK 2018 USER’S MANUAL BIGTIMECLOCKS • Connect the power cable on bottom of the clock and screw in tightly. Press the power on/off switch. Remote control uses A23 12 volt battery • Press A once and 00:00 is flashing, then press B to choose either 12/24hour, press C to save • Press A twice, to change the Hour, use B and C as UP and DOWN key • Press A three times to change Minute, also use B and C to increase or decrease . Press C to save. • The clock has internal GPS. Set the clock initially to the correct time. Then select time zone and after a short period the clock will adjust to accurate time. When placed outdoors the clock should have no problem receiving the satellite GPS signal. However if using indoors place near a window and experiment in different places if you do not receive the GPS signal to automatically adjust to the correct time. 1-702 726-9030 [email protected] www.bigtimeclocks.biz Press A four times, and it shows “on:20”, Press B to turn GPS ON .You can choose “On” or “Off” When "On:20 is flashing, use Button B to choose different time zone and press C to save as follows: US East On:20 US Central On:19 US Mountain On:18 US West On:17 2. SETTING GPS 1. OVERVIEW ®