Directed DS4WS Manuals

DS4WS WIRELESS BLUETOOTH SIREN SECURITY ACCESSORY 510-10652 (1.00) PAGE-1 A. Product Description: The DS4WS wireless Bluetooth Siren security kit is specifically design to work with Directed’s DS4 and DS4+ product line up. The product enables a seamless wireless data transmission between the DS4 or DS4+ Digital remote starter without the need of running physical wires between the engine compartment and the passenger cabin. B. MOUNTING THE DS4WS  The DS4WS should be installed in the engine compartment where it should not obstruct with any moving parts.  Select a location where you can install the mounting bracket to a metal using a self-tapping screw.  Install the power and ground wires then follow the DS4WS pairing procedure. C. PAIRING DS4WS TO A DS4/DS4+ SYSTEM In order for the DS4WS and DS4/DS4+ system to start communicating, the installer must PAIR the DS4WS to the DS4/DS4+. PAIRING procedure must be completed successfully to enable both system to recognize each other and authenticate the communication. Pairing DS4WS to DS4/DS4+ system. 1. Make sure that DS4/DS4+ system has been fully configured and flashed prior to step2. 2. Put the DS4/DS4+ system in pairing mode by; a. Press and release, press and hold the antenna programming button until the LED start to flash. b. Release the programming button 3. Put the DS4WS into paring mode by; a. Press and release, press and hold the programming button until button’s LED starts to flash. b. Release the programming button. 4. The DS4WS wireless siren will sound to confirm successful pairing. 5. Pair the remote by following the normal remote pairing procedure from DS4/DS4+ installation guide. D. USING DS4WS DS4WS will sound the siren according to the command received and according to how the sound was configured (siren mode or voice mode).