DSC Power Series Manuals

Installation Manual ESCORT558O Version 2.1U • W A R N I N G • This manual contains information on limitations regarding product use and function and information on the limitations as to liability of the manufacturer.

DSC Power Series PC1616 PC1832 PC1864 System Manual https://alpha.adt.com/help/61[11/12/2018 9:40:17 PM] DSC Power Series PC1616 PC1832 PC1864 System Manual « Help Center System Overviews Arm & Disarm the System Panic Alarms Trouble Conditions User Access Codes System Testing Other System Information System Overview General Your security system is made up of a DSC control panel, one or more keypads and various sensors and detectors. The control panel will be mounted out of the way in a utility closet or in a basement. All the keypads have an audible indicator and command entry keys. The LED keypads have a group of zone and system status lights. The LCD keypad has an alphanumeric liquid crystal display (LCD). The keypad is used to send commands to the system and to display the current system status. The keypad(s) will be mounted in a convenient location inside the protected premises close to the entry/exit door(s). Select

NEO – Zone Attributes 1 of 2 April 2018 NEO HS2016 / HS2032 / HS2064 / HS20128 v1.3 Zone Attributes The following information describes the zone attribute programming options. To modify the zone attributes, first enter into Section [002] and then enter into the SubSection {001 – 128} (the 3 digit zone number.) After modifying the zone attributes as needed, press the # key and enter the next zone number (SubSection) if additional zones need to be modified; or the # key a second time to your solid red light. Section [002] – Zone Attributes Zone attributes are used to customize the operation of the independent zones. When a zone type (Section [001]) is programmed, the default zone attribute is automatically assigned. See the Reference Manual for the default attribute settings for each zone type. Note: These attributes allow you to override the default settings. DO NOT change any fire zone attributes from their default settings. SubSection {001 – 128} Note: The attributes listed below can be enabled and disabled for each zone independently. 01 – Bell Audible ON: An alarm activates the siren. OFF: Silent alarm. 02 – Bell Steady ON: Siren output is steady when in alarm. OFF: Siren output pulses when in alarm. 03 – Door Chime ON: The keypad chimes when the zone is open and/or when the zone is secured. OFF: The zone does not chime. 04 – Bypass Enabled ON: The zone can be manually bypassed. OFF: The zone cannot be bypassed. Note: Bypass shall not be enabled for fire zones. 05 – Force Arm ON: The system can be armed with the zone open. The zone is temporarily bypassed, and when secured, is monitored by the system. OFF: The system cannot be armed if the zone is open.