DSC Power Series Installation Manual

This manual contains information on limitations regarding product use and function and information on the limitations as to liability of the manufacturer. ...

module turns any touchtone telephone – local or remote – into a fully functional keypad. Once activated, the Escort5580 will act as a guide for the user. The Escort5580 will prompt the user through clear, easy to understand sentences, ...

System Introduction ................................................................................................................................... 5 1.1 Specifications ........................................................................................................................................ 5 1.2 About this Manual ...... ...

8.1 Automation Items and Modes ............................................................................................................. 21 8.2 Programming Modes to Follow PGM Outputs ................... ...

standby • Voltage 12VDC Voice Prompting • All prompts are in complete sentences using a pleasant, easy to understand female voice • Panel status is constantly announced, when applicable, including bypass, trouble, alarm memory and zone status. Library • 250+ system w ...

the installation and programming sections of this manual before you begin. 2.1 Installation Steps Step 1: Mount the Escort5580 Module Mount the Escort5580 module in the same cabinet as the main control panel using the nylon standoffs provided. You can mount the module in a separate cabinet, but it must b ...

2.5 Connecting the PL-513 or PSC04 Controller The RJ-11X telephone jack on the Escort5580 is for connecting the PL-513 or PSC04 Controller. Use an RJ-11X connector cable to connect the Escort5580 to the PL-513 or PSC04. Plug the PL- 513 or PSC04 Controller module into any unswitched AC outlet. Connect automation items for lig ...

the Escort5580. All Escort5580 programming can be done via any local touchtone telephone or via the DLS software. It is extremely important that you read this section of the manual completely before attempting to program the Escort5580 module. 3.1 Entering Installer Programming With the system disarmed: 1. Pic ...

Sections To program a section with toggle options from the Escort5580 programming mode: 1. Enter the 3-digit section number. 2. The system announces the section you have entered with the prompt: “Section (number)” “Section (number)” “Section (number)” “Section (number)” “Section (number)” The system announc ...