Hioki RM2611 Manuals

Introduction Thank you for choosing the Hioki RM2611 Electrode Resistance Meter. Preserve this manual carefully and keep it handy to make full use of this instrument for a long time. Familiarize yourself with the RM2610 Electrode Resistance Measurement System Instruction Manual and the separate document entitled “Operating Precautions” before using the product. Target audience This instruction manual has been written for use by individuals who use the product or provide information about how to use the product. In explaining how to use the product, it assumes electrical knowledge (equivalent of the knowledge possessed by a graduate of an electrical program at a technical high school). Safety notations This manual classifies seriousness of risks and hazard levels as described below. Indicates action that must be performed. Inspection Conduct an inspection and check instrument operation to ensure that no damage has occurred during storage or transport. Troubleshooting If damage is suspected, review the suggestions described under “Before having your product repaired” section of the RM2610 Electrode Resistance Measurement System's instruction manual before contacting your authorized Hioki distributor or reseller. Cleaning If the instrument becomes dirty, slightly moisten a soft cloth with water or a neutral detergent and wipe it clean. Operating Precautions Observe the following precautionary information to ensure that the product can be used safely and in a manner that allows it to perform as described in its specifications. CAUTION Do not place the product on an unstable or uneven surface. Doing so could cause the product to fall or turn over, causing bodily injury or damage to the product. ELECTRODE RESISTANCE METER Instruction Manual Feb. 2020 Revised edition 1 RM2611A961-01 20-02H RM2611 EN 1 2