Lamp FD50-H Manuals

1 Thank you for selecting our product. Before starting installation, please read this manual thoroughly to ensure correct installation. Please keep this manual at hand for future reference. ● This product is a parts set for an indoor sliding door system. ● Provides the door with a two step soft motion in each direction when opening and closing. ● Easy door installation and adjustment. FD50-H SLIDING DOOR SYSTEM Installation Manual (Two-Way Soft Close, Recessed Mount Roller ) Part No.FD50DHCP When vertical frame is not used, use a door stopper. Door height Max.2400 mm 2401‐2700 mm Door width 680‐1500 mm 800‐1500 mm Min.Door thickness 24 mm Max.Door weight 50 kg / door Height adjustable range 3 mm upward, 4 mm downward Forward / backward adjustment ± 2 mm WARNING: If not followed, death or serious injury may result. Caution: If not followed injury or damage may result. 7KLVVOLGLQJGRRUV\VWHPVKRXOGEHLQVWDOOHGE\DTXDOL¿HGSHUVRQ,IWKHV\VWHPLVQRWLQVWDOOHGFRUUHFWO\WKHGRRUZLOOQRW operate smoothly, and may cause injury. ,WLVQHFHVVDU\WRPDQXIDFWXUHWKHIUDPHZLWKVXI¿FLHQWVWUHQJWKVRWKDWLWHQGXUHVWKHZHLJKWRIWKHGRRUDQGDQ\LPSDFW XSRQRSHQLQJFORVLQJWKHGRRU2QO\XVHGHVLJQDWHGVFUHZVDQGHQVXUHWKDWWKH\DUHIDVWHQHG¿UPO\$IUDPHZLWKSRRU strength or loose screws might result in the door falling and causing injury. Do not try to use this product for anything other than its original purpose. Do not use any part for applications outside of its VSHFL¿FDWLRQ Do not disassemble nor modify any parts other than those described in this document. 0DNHVXUHWRIROORZWKHGHVLJQDWHGGLPHQVLRQVVSHFL¿FDWLRQVDQGKRUL]RQWDOYHUWLFDODQJOHV0DNHVXUHWKDWWKHIUDPHLV not warped, since it may affect the movement of the door. ,IFXWWLQJDQ\SDUWVPDNHVXUHWRUHPRYHDQ\EXUUVEHIRUHLQVWDOODWLRQ$OVRFKHFNWKHXSSHUUDLOIRUDQ\OHIWRYHUEXUUVRU scraps and remove these. 7KLVSURGXFWLVDSDUWIRUDUFKLWHFWXUDO¿WWLQJV$IWHULQVWDOODWLRQPDNHVXUHWRWHVWWKH¿QLVKHGSURGXFWWKRURXJKO\WRHQVXUH WKDWLWLVZHOOIXQFWLRQLQJDQGVDIH 0DNHVXUHWRFKHFNWKHVFUHZVIRUVODFNDWUHJXODULQWHUYDOVRQHPRQWKIURP¿UVWXVDJHKDOID\HDUDQGWKHQRQHWLPH every year is recommended). ・ The closing speed of the soft closing type door may change due to ambient temperature, operating method or installation quality. ・ Recommended ambient temperature range is 5 to 40 ℃. Prohibited Warning Caution Required Meaning of symbols FOR YOUR SAFE WORK AND CORRECT INSTALLATION ABOUT THE PRODUCT SPECIFICATION

1 Thank you for selecting our product. Before starting installation, please read this manual thoroughly to ensure correct installation. Please keep this manual at hand for future reference. ● This product is a parts set for sliding door system for indoor use. ● Dual soft closer enables two-way soft closing motion for both direction. ● Easy door installation and adjustment. FD50-H SLIDING DOOR SYSTEM Installation Manual (Two-Way Soft Close, Recessed Mount Roller ) Part No.FD50DHCP When vertical frame is not used, use door stopper without fail. Max.Door width 680 ‒ 1500mm Max.Door height 2400mm Min.Door thickness 24mm Max.Door weight 50kg / door Height adjustable range 3mm upward, 4mm downward Forward / backward adjustment ±2mm WARNING: If these warnings are not followed, it may result in death or serious injury. Caution: If these cautions are not followed, it may result in injury or damage. This (sliding door system) should be installed by an experienced person who has correct knowledge. If the system is not installed correctly, the door will not operate smoothly, and or may cause injury. It is necessary to manufacture the frame with sufficient strength so it endures the weight of the door and impact shocks upon opening/closing the door. A frame with poor strength might result in improper and slower movement of the door. In the worst case, the door might drop down and cause injury. Do not try to use this product for any other purposes other than originally intended for. Do not use the parts for applications that are out of specification. Do not disassemble nor modify any parts than those described in this document. Make sure to follow the designated measurements and specifications as well as horizontal and verticals angles. Make sure that the frame is not warped, since it may affect the movement of the door. If cutting any parts, make sure to remove any burr before installation. Also check the upper track for any left-over burr or scrap and remove these. This sliding door system is a part for furniture fittings. After installation, make sure to test the finished product thoroughly to ensure that it is well-functioning and safe. Make sure to test the screws for slack at regular intervals (one month from first usage, half year and then one time every year is recommended). ・ The closing speed of the soft closing type door may change due to ambient temperature, operating method or installation quality. ・ Recommended ambient temperature range is 5 to 40 degrees centigrade. Prohibited Warning Caution Required Meaning of symbols FOR YOUR SAFE WORK AND CORRECT INSTALLATION ABOUT THE PRODUCT SPECIFICATION

1 Thank you for selecting our product. Before starting installation, please read this manual thoroughly to ensure correct installation. Please keep this manual at hand for future reference. FD50-H SLIDING DOOR SYSTEM Installation Manual (Surface Mount Roller, Standard Sliding) Part No.FD50HMP SPECIFICATIONS ● This product is a parts set for a sliding door system for indoor use. ● Easy door installation and adjustment. Door height Max. 2400 mm 2401- 2700mm Door width 774- 1500mm 800- 1500mm Min. Door thickness 30 mm Max. Door weight 50 kg / door Adjustable height range ± 4 mm ABOUT THE PRODUCT FOR YOUR SAFE WORK AND CORRECT INSTALLATION WARNING: If not followed, death or serious injury may result. Caution: If not followed, injury or damage may result. This (sliding door system) should be installed by a qualified person. If the system is not installed correctly, the door will not operate smoothly, and may cause injury. It is necessary to manufacture the frame with sufficient strength so that it endures the weight of the door and any impact upon opening/closing the door. Only use designated screws and ensure that they are fastened firmly. A frame with poor strength or loose screws might result in the door falling and causing injury. Do not try to use this product for anything other than its original purpose. Do not use any part for applications outside of its specification. Do not disassemble nor modify any parts other than those described in this document. Make sure to follow the designated dimensions, specifications, and horizontal/vertical angles. Make sure that the frame is not warped, since it may affect the movement of the door. If cutting any parts, make sure to remove any burrs before installation. Also check the upper track for any left-over burrs or scraps and remove these. This product is a part for architectural fittings. After installation, make sure to test the finished product thoroughly to ensure that it is well-functioning and safe. Make sure to check the screws for slack at regular intervals (one month from first usage, half a year and then one time every year is recommended). Prohibited Warning Caution Required Meaning of symbols

1 ���������������������������������������������� ���������������������������������������� ���������������� ● This product is a parts set for an indoor sliding door system for residential & commercial use. ● Built in soft closer enables two-way soft closing movement in both directions. ● The door can be installed without the use of tools. Thank you for using our product. Before installation, please read this manual thoroughly to ensure correct installation. Please keep this manual at hand for future reference. ����������������� ����������� Max.2400 mm 2401‐2700 mm ���������� 680‐1500 mm 800‐1500 mm ������������������ 24 mm ��������������� 50 kg / door ������������������� 3 mm upward, 4 mm downward ���������������� ± 2 mm ������������� ・ The closing speed of the soft closing type door may change depending on the ambient temperature, operating method or installation quality. ・ Recommended ambient temperature range is 5 to 40 ℃ . ������������������������������������������������������������� �������:If not followed, injury or damage may result. ��������������������������������������������������������������������������������������������������������������������������������� may fall and cause injury. ���������������������������������������������������������������������������������������������������������������������� �������������������������������������������������������������������������������������������������������������� ��������������������������������������������������������������������������������������������������������������� Do not disassemble or modify any parts other than those described in this document. ������������������������������������������������������������������������������������������������������������������������ frame or door may cause failure. If cutting any parts, make sure to remove any burrs before installation. Also check the upper track for any left-over burrs or scraps and remove these. �������������������������������������������������������������������������������������������������������������������������������� Please inform the end user how to use the product safely. ������������������������������������������������������������������������������������������������������������������������ every year is recommended). ���������������������������������������� Prohibited Warning Caution Required Meaning of symbols When vertical frame is not used, use a door stopper.

1 Door Door pocket FD50-H SLIDING DOOR SYSTEM Installation Manual (Recessed Mount Type for Pocket Door, with Two-way Soft Close) Part No.FD50DHCP-PD FOR YOUR SAFETY AND CORRECT INSTALLATION Thank you for using our product. Before installation, please read this manual thoroughly to ensure correct installation. Please keep this manual at hand for future reference. ABOUT THE PRODUCT ● This is a parts set for sliding door system for residential & commercial use. ● Built in soft closer enables two-way soft closing movement in both direction. ● Two sections of track for easy maintenance after installing. SPECIFICATIONS ・ The closing speed of the soft closing type door may change depending on the ambient temperature, operating method or installation quality. ・ Recommended ambient temperature range is 5 to 40䉝 ※ 1 When using a light weight door, you may feel the resistance of the soft closer when opening the door. Door height Max. 2400 mm 2401 - 2700 mm Door width 680 - 1500 mm 800 - 1500 mm Min. Door thickness 30 mm Max. Door weight 50 ※ 1 kg/door Vertical adjustment 3 mm upward, 4 mm downward Depth adjustment ± 2 mm Warning : Caution : If not followed, injury or damage may result. Prohibited Warning Caution Required Meaning of symbols If not followed, death or serious injury may result. Do not use this product for any other purpose, or with doors that are outside the specifications of this manual. Do not disassemble or modify any parts other than those described in this document. This product should be installed by a qualified person in accordance with this manual. If it is not installed correctly, the door may fall and cause injury. Provide a frame that can withstand the weight and impact of opening and closing the door. Be sure to use the specified screws and tighten them securely. If the mounting strength is insufficient, the door may fall and cause injury. If cutting any parts, make sure to remove any burrs before installation. Also check the upper track for any left-over burrs or scraps and remove these. Install the product with two people (in the case of one person, there is a risk of damaging components). Follow the specified dimensions, specifications, and alignment of the door and frame. Warping, tilting or twisting of the frame or door may cause failure. This product is a part for architectural fittings. After installation, please check the function and safety of the final product. Please inform the end user how to use the product safely. Make sure to check the screws for slack at regular intervals (one month from first usage, half a year, and then one time every year is recommended). When installing the “pocket door”, make an “easy-maintenance” structure. For example, use a removable panel.