Olympus Lock FC10 Manuals
1 pdf manual(s) Olympus Lock FC10 for free download (Document Types: Installation instructions)
Olympus Lock FC10 Installation instructions [PDF] (2 pages)
- Identifier: id-1438314
- Brand: Olympus Lock
- Device: FC10 Locks
- Type: PDF
- Key Aspects: Basic Configuration Guidelines, Common Issue Diagnostic Flows, Step-by-Step Assembly Procedures
- UPD Date: 05.05.2026
- Source File: 1560129.pdf
- Pages: 2
- Description: Comprehensive guide for the Olympus Lock FC10.
Click to expand and read text
800-525-0954 | www.olympuslock.com [email protected] Copyright © 2020 Olympus Lock, Inc. INSTALLATION INSTRUCTIONS File Cabinet Lock FC10 Recommended Tools (Fig. 1) Flat Bladed Screwdriver Phillips Screwdriver Narrow Jawed Channel Lock Pliers Figure 1 Parts – In Order of Assembly (Fig. 2) a. Lock Housing b. Outer Bezel Ring c. Inner Spacer Ring d. Nut Retaining Washer e. Brass Nut f. Inner Cam Stop g. Cam h. Outer Cam Shifter i. Retaining Screw j. Connecting Link a b c d e f g h j i Figure 2 1. The file cabinet should be prepared for accepting the lock by having a partially punched ¾ inch D-D (double-D) hole and an internal gang bar installed down the right side of the cabinet. Using your screwdriver and pliers remove the slug from the partially punched hole. 2. Slide the outer bezel ring onto the lock housing and insert the housing through the D-D hole. (Fig. 3) 3. From the inside install the inner spacer ring, nut retaining washer and brass nut. DO NOT OVER TIGHTEN Once the nut is firm bend one of the tabs on the nut retaining washer against a flat side of the nut to hold it in place. (Fig. 4) 4. With the lock housing installed add the inner cam stop by inserting the small brass pin in the hole supplied in the housing. (Figs. 5 & 6) Figure 6 Figure 4 Figure 3 Figure 5 5. The cam is installed with the side labeled “OUT” facing the rear of the lock. The brass pin travels freely within the notched side of the inner cam stop. (Fig. 7) 6. The outer cam shifter can provide two different functions depending on how it is installed. • “Non Key Retaining” function: allows the key to be removed in both the locked and unlocked position and the shifter is installed so the brass pin on the cam travels in the long outer notch of the shifter labeled “LM” for lost motion. (Fig. 8) • “Key Retaining” function: allows you to remove the key in the locked position only and the brass pin of the cam fits into the small inner notch of shifter labeled “KR”. (Fig. 9) Figure 7 Please Note: To correctly synchronize the lock it must be assembled without a key inserted and the cam pointing up in the locked position. (Figs. 8 & 9) Finally, all is secured using the supplied retain- ing screw. Figure 8 (non key retaining) Figure 9 (key retaining) INSTRUCTIONS CONTINUED ON PAGE 2
FC10: Related Instructions
800-525-0954 | www.olympuslock.com [email protected] Typical Installation Flush Lipped Overlay Overlay* Full Overlay *Overlay installation is not recommended Technical operations guide for the Olympus Lock 100DR Door locks. The manual highlights safety, specifications, technical specifications, warranty information.
Assembled with vertical long cam 720-3-2 or extra long 3” cam 720-3-4 Cam Installation Instructions Page 1 Stop pin Stop pin Stop pin Stop pin Stop pin Stop p Instructions for safe usage of the Olympus Lock 720 Series Locks. This reference manual explains hardware instructions, technical overview, maintenance procedures, operating instructions.
800-525-0954 | www.olympuslock.com [email protected] Copyright © 2020 Olympus Lock, Inc. INSTALLATION INSTRUCTIONS IC Cam Lock ME93LM/DM Typical Installatio Instruction guidebook for the Olympus Lock ME93LM/DM Locks. It contains information on software configuration, detailing setup, device safety checks, safety protocols.
Included Accessories: 2 nickel plated keys 12-3 angle strike 4 lock mounting screws Copyright © 2020 Olympus Lock, Inc. 7/8, 1-3/8 or 1-5/8 barrel length Long Advanced user manual for the Olympus Lock 200DW Locks. This manual elaborates on dimensions and layout, operating modes, safety features, user preferences.
Included Accessories: 2 nickel plated keys 12-3 angle strike 4 lock mounting screws Copyright © 2020 Olympus Lock, Inc. 7/8 or 1-3/8 barrel length Long bolt op User handbook for the Olympus Lock 600B Locks. It offers guidance on operating guidelines, startup procedures, user instructions, product maintenance.
800-525-0954 | www.olympuslock.com [email protected] Copyright © 2020 Olympus Lock, Inc. INSTALLATION INSTRUCTIONS IC Cam Lock CR25LM/DM Typical Installatio Instruction and reference manual for the Olympus Lock CR25LM Locks. It explains maintenance and safety, daily usage, setup validation.
Similar Manuals in the Locks Category
1 Installation Instructions for Wi-Q™ Technology 45HQ Mortise Locks Contents These installation instructions describe how to install your 45HQ Mortise Lock. T Device guide for the Dormakaba BEST Wi-Q 45HQ Locks. The document presents product maintenance, usage examples, repair references.
OneKEY IR4 Keys, Chargers & OneKEY Manager Section 1: Charger (4 & 8 Position) Installation • Adhesive Mount - Use the povided alcohol wipe to clean the area Comprehensive guide for the inVue OneKEY Locks. It details troubleshooting tips and backup procedures, system parameters, hardware instructions.
For Spartan, Titan, 6124, and 6125 lock bodies Sargent & Greenleaf, Inc. One Security Drive Nicholasville, KY 40356 Phone: (800) 826-7652 Fax: (800)-634-4843 Ph User documentation for the Sargent and Greenleaf 6120 Locks. The document contains usage procedures, technical overview, operating guidelines, device overview.
3600 Series ANSI Grade 2 Tubular Lever Set Installation Instructions Meets ANSI 156.2 I-LS00769 For use on doors 1-3/8” to 1-3/4” (35 mm - 45 mm) thick REV Owner’s manual for the hager 3600 Series Locks. The document guides users through calibration steps, usage procedures, device features.