PaloAlto Networks PA-5200 Series Manuals

PA-3400 Series Next-Gen Firewall Hardware Reference docs.paloaltonetworks.com

PA‐5200 Series Next‐Gen Firewall Hardware Reference PA-5200 Series Firewall Overview

PA‐5200 Series Next‐Gen Firewall Hardware Reference Service the PA-5200 Series Firewall

PA-5200 Series Next-Gen Firewall Hardware Reference paloaltonetworks.com/documentation

1 Before You Begin Use this document to install and begin setting up your Palo Alto Networks PA-5200 Series firewall. Refer to the PA-5200 Series Next-Gen Firewall Hardware Reference at https://docs.paloaltonetworks.com/hardware for safety information, specifications, and more detailed procedures for installing the firewall. ◼ Verify that the installation site has an AC (or DC) power source. ◼ Have a #1 and #2 Phillips-head torque driver available. Use the #1 Phillips-head bit to attach the rack-mount brackets to the firewall and use the #2 bit to secure the rack-mount brackets to the equipment rack posts. ◼ Unpack the equipment and verify that you received the following items: Rack Mount the Firewall The PA-5200 Series firewall ships with two rack-mount brackets for an installation in a two-post or four-post 19” equipment rack. If you install the firewall in a four-post rack, you can purchase an optional four-post kit to secure the firewall to the back rack posts to provide additional support. Both procedures are covered in this section. Install the Firewall in a Two-Post Equipment Rack 1 Attach one rack-mount bracket to each side of the firewall using nine #8-32 x 5/16” screws for each bracket (Figure 1) and torque to 15 in-lbs. For a two-post rack, we recommend that you install the brackets in the mid-mount position as shown in Figure 1. For a four-post rack or cabinet, install the rack-mount brackets in the front-mount position as shown in Figure 3. 2 With help from two other people, hold the firewall in place in the rack and secure the rack-mount brackets to the rack using four screws for each bracket (Figure 2). Use the appropriate screws (#10-32 x 3/4” or #12-24 x 1/2”) for your rack and torque to 25 in-lbs. Use cage nuts (not provided) to secure the screws if the rack has square holes. (Optional) Install the Four-Post Rack Kit 1 Attach one rack-mount bracket to each side of the firewall using nine #8-32 x 5/16” screws for each bracket (Figure 3) and torque to 15 in- lbs. Ensure that the rack-mount brackets are positioned at the front of the firewall. 2 Attach one side rack-mount rail to each side of the firewall using four #8-32 x 5/16” screws for each bracket (Figure 4) and torque to 15 in- lbs. Ensure that the beveled edge on each bracket is facing the firewall. 3 With help from two other people, hold the firewall in the rack and secure the rack-mount brackets to the rack using four screws for each bracket (Figure 5). Use the appropriate screws (#10-32 x 3/4” or #12-24 x 1/2”) for your rack and torque to 25 in-lbs. Use cage nuts (not provided) to secure the screws if the rack has square holes. 4 Slide one back rack-mount bracket into each of the two previously installed side rack-mount rails (Figure 5) and secure the back brackets to the back rack posts (Figure 6) using four screws for each bracket (#10-32 x 3/4” or #12-24 x 1/2” screws) and torque to 25 in-lbs. Figure 1 Figure 2 Figure 3 Figure 5 Figure 6 Figure 4 Beveled Edge Faces Firewall Qty Description 1 PA-5200 Series next-generation firewall. 2 AC power cords. If you ordered the firewall with DC power supplies, the DC power cables are not included. 1 DB-9 female to RJ-45 male console cable. 2 Velcro straps to secure the AC power cords to the power supplies. 1 Standard RJ-45 CAT6 Ethernet cable for management (MGT) port access. 2 Front rack-mount brackets used to secure the firewall to a two-post or four-post equipment rack. 20 #8-32 x 5/16” front rack-mount bracket screws to attach the front rack-mount brackets to the firewall. (Two of the twenty screws are spares.) 10 #10-32 x 3/4” rack-mount screws to secure the front rack-mount brackets to a rack with #10-32 threaded holes. (Two of the ten screws are spares.) 10 #12-24 x 1/2” rack-mount screws to secure the front rack-mount brackets to a rack with #12-24 threaded holes. (Two of the ten screws are spares.) 1 End User License Agreement (EULA). 1 China Restriction of Hazardous Substances (RoHS) declaration. PA-5200 Quick Start Guide 1 2 Ensure that the equipment rack is properly anchored so it can support the weight of the installed equipment without tipping. docs.paloaltonetworks.com Page 1 of 2