Siemens QAX850 Manuals

CE1N2722en 28.08.2007 Building Technologies HVAC Products 2 722 Master room unit QAX850 for RRV… controllers Multifunctional, digital room unit for installer and end-user interface with RRV… controllers. 2 wire bus connection Use Room unit in combination with an RRV… controller for HVAC plants in: • Residential apartments • Residential single house • Autonomous light commercial applications For use with RRV… controllers in air based plants including heating, cooling and ventilation (HVAC) equipment. Suitable for Standard, Duo-zone, Duo-switch and Multi- zone applications. Functions • Remote control and monitoring of an RRV… controller • Parameter adjustments by installer • Room temperature measurement • Time clock operation • Comfort temperature setpoint adjustment • Energy saving temperature setpoints adjustment • Auto timer selection • Fan speed selection • Zone selection and settings (only for RRV controllers with zone outputs) • Display of operating mode, temperature, time, fan speed and zone values. Use Application Primary functions Operator functions

Building Technologies / HVAC Products CE1B2726en03 29.08.2008 1/2 B2726.03 Operating instructions QAX850 / RRV852 + Duo-switch function QAX850 is a master room unit for the RRV852 standard control system. This system allows you to control your heating and / or cooling and to set your ideal temperature conditions. The system provides Comfort, Energy Saving and Auto Timer mode with a 7-day programmable schedule. Factory settings are already set however you can adjust these to suit your personal needs. System On and Fan Speed control � Press to turn system on or off and to select fan speeds - Low / Medium / High / Auto Fan and System Off. If your system is single speed fan only, then simply press to turn system on or off. � When powering up, the QAX850 will display all LCD symbols. It will then revert to normal display. The time segments will be flashing if time needs to be set. � The system off mode turns the whole system off and is indicated by the standby symbol . Some systems will include extreme high / low temperature protection activation during – contact your supplier for further details. Setting actual time and day � Press button one time to set the time clock. (You will need to reset clock if there is a power loss of more than 20 minutes.) � Press or button to set the current time and then press to confirm.. � If current time is 12-hour format and you wish to change to 24-hour format, press button passing 11:59PM or press button passing 12:00AM. � If current time is 24-hour format and you wish to change to 12-hour format, press button passing 23:59 or press button passing 00:00. � Press button 2 times within 2 seconds. Day symbol flashes. � Press or button to set the current weekday. � Press to confirm. ( 1 = Monday through 7 = Sunday). Operation modes Press button to cycle through Comfort or Energy Saving or Auto Timer mode. Do you wish to change to Comfort mode? Press button until display shows symbol. Room temperature is maintained according to Comfort setpoint and actual room temperature. A Heat or Cool symbol will be displayed to indicate the selected system mode. Do you wish to change to Energy Saving mode? Press button until display shows symbol. This is typically the mode for night time or unoccupied periods where you require internal temperature not to drift to an extreme level. A Heat or Cool symbol will be displayed to indicate the selected system mode. Do you wish to change to Auto Timer mode? Press button until display shows symbol. The system will automatically change over between Comfort and Energy Saving mode according to 8 pre-programmed timers. System Off Comfort mode: System operates to maintain comfortable room temperature Energy saving mode: System operates only when actual temperature reaches energy saving setpoints Auto timer mode: System will switch from comfort mode to energy saving according to program settings Heating Cooling A1 ... A8 Time program AUTO Auto fan speed Low / Medium / High fan speed 1 ... 7 Weekday indication Z1 Z2 Apparatus indication / Weekday 1 .. 7

Building Technologies / HVAC Products CE1B2727en01 29.08.2008 1/2 B2727.01 Operating instructions QAX850 / RRV856 QAX850 is a master room unit for the RRV856 multizone control system. This system allows you to control your heating and / or cooling and to set your ideal temperature conditions within various zones in the building. The system provides Comfort, Energy Saving and Auto Timer mode with a 7-day programmable schedule. Factory settings are already set however you can adjust these to suit your personal needs. System On and Fan Speed control � Press to turn system on or off and to select fan speeds - Low / Medium / High / Auto Fan and System Off. If your system is single speed fan only, then simply press to turn system on or off. � There may be delays on start-up and after changes in mode. This is normal, as there are time delays built in to ensure safe operation of the system. � When powering up, the QAX850 will display all LCD symbols. It will then revert to the normal display. The time segments will be flashing if time needs to be set. � The system off mode turns the whole system off and is indicated by the applicable Z1 ... Z6 zones together with the standby symbol . Some systems will include extreme high / low temperature protection activation during – contact your supplier for further details. Setting actual time and day � Press button one time to set the time clock. (You will need to reset clock if there is a power loss of more than 20 minutes.) � Press or button to set the current time and then press to confirm.. � If current time is 12-hour format and you wish to change to 24-hour format, press button passing 11:59PM or press button passing 12:00AM. � If current time is 24-hour format and you wish to change to 12-hour format, press button passing 23:59 or press button passing 00:00. � Press button 2 times within 2 seconds. Day symbol flashes. � Press or button to set the current weekday. � Press to confirm. ( 1 = Monday through 7 = Sunday). Zone control Remote operation of other zone room units is possible via this master room unit by pressing the Z button. Zones are numbered and indicated by the Z2 ... Z6 symbols. Operation modes Press button to cycle through local zone off or Comfort or Energy Saving or Auto Timer mode. Do you wish to turn off this zone? Press button until display shows symbol. The local comfort zone will be switched off. Do you wish to change to Comfort mode? Press button until display shows symbol. Room temperature is maintained according to Comfort setpoint and actual room temperature. A Heat or Cool symbol will be displayed to indicate the selected system mode. Do you wish to change to Energy Saving mode? Press button until display shows symbol. This is typically the mode for night time or unoccupied periods where you require internal temperature not to drift to an extreme level. A Heat or Cool symbol will be displayed to indicate the selected system mode. System Off Comfort mode: System operates to maintain comfortable room temperature Energy saving mode: System operates only when actual temperature reaches energy saving setpoints Auto timer mode: System will switch from comfort mode to energy saving according to program settings Heating Cooling A1 ... A8 Time program AUTO Auto fan – Fan speed changes automatically depending on heating/cooling demand from all zones Low / Medium / High fan speed 1 ... 7 Weekday indication Z1 ... Z6 Zone indication / Weekday 1 .. 7 Z

Building Technologies / HVAC Products CE1B2726en01 29.08.2008 1/2 B2726.01 Operating instructions QAX850 / RRV852 QAX850 is a master room unit for the RRV852 Duo-zone control system. This system allows you to control your heating and / or cooling and to set your ideal temperature conditions within the two main areas of your home. The system is divided into the main living area (Day zone) and the main night time area (Night zone). An Auto Timer mode with a 7-day programmable schedule is provided. Factory settings are already set however you can adjust these to suit your personal needs. System On and Fan Speed control � Press to turn system on or off and to select fan speeds - Low / Medium / High / Auto Fan and System Off. If your system is single speed fan only, then simply press to turn system on or off. � When powering up, the QAX850 will display all LCD symbols. It will then revert to normal display. The time segments will be flashing if time needs to be set. � The system off mode turns the whole system off and is indicated by a standby symbol . Some systems will include extreme high / low temperature protection activation during – contact your supplier for further details. Setting actual time and day � Press button one time to set the time clock. (You will need to reset clock if there is a power loss of more than 20 minutes.) � Press or button to set the current time and then press to confirm. � If current time is 12-hour format and you wish to change to 24-hour format, press button passing 11:59PM or press button passing 12:00AM. � If current time is 24-hour format and you wish to change to 12-hour format, press button passing 23:59 or press button passing 00:00. � Press button 2 times within 2 seconds. Day symbol flashes. � Press or button to set the current weekday. � Press to confirm. ( 1 = Monday through 7 = Sunday). Operation modes Press button to cycle through Day zone or Night zone or both Day and Night zone or Auto Timer mode. Do you want Day zone operation only? Press button until display shows symbol. Day zone temperature is maintained according to the Day zone setpoint. A Heat or Cool symbol will be displayed to indicate the selected system mode. Do you want Night zone operation only? Press button until display shows symbol. Night zone temperature is maintained according to the Night zone setpoint. A Heat or Cool symbol will be displayed to indicate the selected system mode. Do you want both Day and Night zones to operate together? Press button until display shows both symbol. Day and Night zone temperature is maintained according to the Both zone setpoint and the average actual temperature between both zones. Heat or Cool symbol will be displayed to indicate the selected system mode. System Off (Standby) Day zone: System supplies air to the day zone only and controls to the day zone temperature setpoint Night zone: System supplies air to the night zone only and controls to the night zone temperature setpoint Both Day/Night zone: System supplies air to both the day and night zones and controls to the Both zone temperature setpoint Auto timer mode: System will change over between Day zone and standby or Night zone and standby Heating Cooling A1 ... A8 Time program AUTO Auto fan speed Low / Medium / High fan speed 1 ... 7 Weekday indication / Weekday 1 .. 7