MC2 Audio E45 Owner's Manual

Text of MC2 Audio E45 Owner's Manual

2 AUDIO Ltd.,

Units 6-8, Kingsgate, Heathpark Industrial Estate, HONITON, Devon EX14 1YG England Tel: ++(0)1404.44633 Fax: ++(0)1404.44660 www.mc2-audio.co.uk

EC DECLARATION OF CONFORMITY

3 IMPORTANT SAFETY INSTRUCTIONS 4, 5, 6, 7 INSTALLATION Electrical 4 RF Emissions 8 Mechanical 8 GENERAL INFORMATION 9 CONNECTIONS Inputs 10 Outputs 10 Bridged Operation 11 OPERATION Switching on 11 Level controls 11 Bar signal indicators 11 -3dB indicator 11 Limiters 11 PRC indicators 11 Temperature control 12 Fault indicator 12 Bridged LED 12 MAINTENANCE 12 TECHNICAL SPECIFICATION 13 APPENDIX Table of PRC settings

Important Safety Instructions

1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not block any ventilation openings, install in accordance with the manufacturer’s instructions. 6) Unplug this apparatus during lightning storms or when unused for long periods of time. 7) Clean only with a dry cloth. 8) Do not use this apparatus near water; the apparatus shall not be exposed to dripping or splas

DO NOT USE THE UNIT IF THE ELECTRICAL POWER CORD IS FRAYED OR BROKEN. The power supply

cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords and plugs and the point where they exit from the appliance. ALWAYS OPERATE THE UNIT WITH THE AC GROUND WIRE CONNECTED TO THE ELECTRICAL SYSTEM GROUND. Precautions should be taken so that the means of grounding of a pie

Read these instructions.

2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with a dry cloth. 7. Do not block any ventilation openings, install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources, such as radiators, heat registers, stoves or other apparatus (including amplifiers) that produce heat. 9. Protect the power cord from

MC2 Audio Amplifier Owners Instructions: