RDS NLH710 Operation & User’s Manual

1 Product Summarize................................................................................................................................................. 2 1.1 Key features......................................................................................................................................... ...

1.1 Key features ◆ CCD Sony 1/3’ CCD Image Sensor 480TVL ◆ Video resolution D1 704*576 ◆ Support image shield, image capture ◆ Real-time bidirectional speaks ◆ Auto-recovery function if exception occurs and auto-connection if the network disruptions ◆ H.264 compression, realize transmission of high definition video over lo ...

◆ Network: Network interface ◆ Power: Power interface ◆ PS2: Use for alarm 2 Installation Guide 2.1 System requirement ◆ Operating System: Windows 2000/XP ◆ Processor: Intel Pentium III, 1G or Higher (Pentium IV, 2G or Higher recommended) ◆ RAM: 256 MB or more ◆ Color Monitor: At least DirectX 8.1 or higher and 3 ...

[Install]. The below window will pop up: ...

3. Instructions You can select either mode to review the images, web browser or client software. 3.1 Client Mode Run DVS Client, it will appear: When the client is used the first time, user needs to input the IP address or domain name to the client in order to open the monitor screen, the steps are as follows: ① ...

Click[Add]，pop following dialog: ③ You can input the assigned IP and click [OK] ④ Select the IP address that you want and click [Connect],the window below will pop up: ...

click [Connect],the window below will pop up: ⑥ select “chn. 0 ” press and left click and drag it to any window, as follow: ...

3.2 The main interface function 3.2.1 Toolbar Followed by sound, talk, record, color, setup, play/stop. ◆ Sound: Click it to turn on/off the volume. ◆ Talk: Click it to turn on/off the talk. ◆ Record: Click once to start a record, click one more to stop record. When the below window appear: ...