Plantronics CS55 Product Information

CS50/55 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . WIRELESS OFFICE HEADSET SYSTEM ...

Location ....................................... 3 Headset/Handset Mode ............... 3 Placing and Receiving a Call Using Headset .......................... 4 Placing and Receiving a Call Using Handset .......................... 4 FEATURES Out of Range Warning .................. 5 Low Battery Warning ................... 5 Recharging Headset .................... 6 Replacing Battery ........................ 6 OPTIONS Optional Handset Lifter Use ........ 7 IntelliStand™ Function ................ 8 Switching to Handset ................... 8 TROUBLESHOOTING ..... 9 TECHNICAL SUPPORT 11 SUBSCRIPT ...

To place a call using the headset, the system must be in headset mode. Take the handset off hook and dial in the normal way. You will then be able to talk through your headset. When the call is complete, return the telephone handset to the cradle. RECEIVING A CALL USING YOUR HEADSET When your telephone rings take the handset off hook. Ensure that your CS50/55 Wireless Office Headset System is in headset mode. You will then be able to talk through your headset. When the call is complete, return the telephone handset to the cradle. PLACING AND RECEIVING A CALL USING HANDSET In handset mode, the telephone can be used ...

To recharge the headset, place it into the charge cradle 1 in the base unit. During charging, the charge indicator 9 on the base unit will flash amber. When the headset is fully charged, the charge indicator on the base unit will stop flashing and remain illuminated. A completely depleted headset requires a minimum charge time of 1 hour before use, and 3 hours to fully charge. REPLACING THE HEADSET BATTERY Should it be necessary to replace the headset battery at anytime, please refer to the diagrams below. OPTIONS SETTING UP THE OPTIONAL HANDSET LIFTER Use the directions provided with the handset lifter to set it up. ...

conjunction with a Plantronics Telephone Handset Lifter, you can enable the IntelliStand feature. The IntelliStand senses when the headset has been removed from or placed in the CS50/55 base unit, automatically activating the lifter and enabling headset/handset mode to answer or end a call. The IntelliStand feature is disabled (off) when the IntelliStand switch 10 is in the up position (-) or enabled (on) when the switch is in the down position (=). SWITCHING FROM HEADSET TO HANDSET WHEN USING THE HANDSET LIFTER If during a call, you are using your headset and wa ...

• Move the CS50/55 base unit further away from telephone or computer. • If your telephone has a receive volume control, lower your telephone volume until the distortion disappears. • Lower the listen volume 15 control on the headset. If the distortion persists, lower the listen volume master setting 11 on the back of base. See Step 5.1 and 5.2 in the QSG. • Perform system reset. See page 13. People I talk to can hear a buzz • Your phone may be sensitive to RF in the background. interference. Move the CS50/55 base further away from your phone. • If the AC Adapter is plugged into a ...

use a replacement headset with the base unit then the units must be re-subscribed as follows: 1. Return the headset to the headset charge cradle. 2. Press and hold both the talk volume fine tune buttons on the base unit for a minimum of 5 seconds. The power indicator 3 will then flash (red). 3. Press and hold the headset mute control button for a minimum of 5 seconds. The talk indicator light 17 on the headset will then illuminate (green). Successful re-subscription is indicated when the power indicator is fully illuminated and the talk i ...

60961-11 HL 10 Telephone Handset Lifter 65116-01 On-line Indicator 64399-01 Battery 64400-01 Battery Door 64401-01 AC Adapter 64402-11/63902-14 CS50/55 Headset REPLACEMENT PARTS & OPTIONAL ACCESSORIES PL AN TRO NICS CS50/55 WIRELESS OFFICE HEADSET SYSTEM Quick Start Guide For information on replacement parts and optional accessories, call Plantronics at (800) 544-4660 x5538, or visit the Plantronics website at www.plantronics.com 64394-11 Earloops–pack of 3 66735-01 Over-the-Head Band 43937-01 Replacement Cushions Foam (2) 67063-01 Replacement Cushions Leatherette (2) 64397-01 Behind-the-Head Neckband with Adapter 64 ...

Innovation, and IntelliStand are trademarks or registered trademarks of Plantronics, Inc. US patents 5,210,791; 6,735,453; D492,667 and D496,029; EM 69109; Patents Pending Printed in China 63915-04 (09/05) ...