Ingenico iWL220 Manual 

acquirer for more details. Contents 1. Introduction 2 2. Important Safety Instructions 3 3. Standards 5 4. Installing the Bluetooth Terminal 7 5. Installing the GPRS Terminal 7 6. Using the Terminal 8 7. Battery & Display Information 8 8. Signal Information for GPRS 9 9. ...

Safety Instructions and instructions on transaction processing, printing reports and general maintenance of the terminal. Base Unit and Handset Placement for Bluetooth Terminals PLEASE READ THIS VERY IMPORTANT INFORMATION BEFORE PLACING YO ...

phone display. There are a number of factors that can affect the rate of Battery drainage, for example: • length of time off the base • number of receipts per transaction • time before sleep mode is activated • time between transact ...

place during the normal operation of theterminal. See sections “Removal of SAM1/SAM2/SIM, mo ...

Although you rent your terminal for a monthly charge it is strongly recommended that you insure the terminal against loss or damage to a value as recommended by your acquirer. 43. Security Warning Notice This terminal is used for the secure transfer of funds using credit and debit cards. As such it is designed as a high secu ...

• the protection of the health and the safety of the user and any other person. • the protection requirements with respect to electromagnetic compatibility and complies with harmonised standards. Depending iWl220/250 model involved stan ...

Select Function Key in Function Code and then press ENTER SYSTEM Radio Setup? Enter=YES Clear=NO RADIO SETUP Assign to base Select base Remove base SYSTEM MENU Totals Print Function Codes Select Function Key in Function Code and then press ENTER Print Transaction Log Continue? Enter=YES Clear=NO 4. Press the GR ...

Switching the Terminal On and Off To SWITCH ON the terminal when it is off the base, press: If on the base the terminal will always be powered. To SWITCH OFF the terminal, press (at the same time): 7. Battery & Display Information Your terminal is supplied with a removable, rechargeabl ...

and then press ENTER 1. To change a Waiter Name, key in the Code of the Waiter that requires change and then press the GREEN button. 2. Amend the Waiter Name by using the RED and YELLOW buttons to erase letters. Press the GREEN button and the terminal will return to the Waiter Setup Menu. Creating De ...

on the terminal. At the READY prompt press the MENU button. The first option on the list will be highlighted. The actual options shown may differ from those shown here. PLEASE NOTE: Only three options can be displayed on the terminal screen at any one time. Use the arrow buttons to view the av ...