Symbol LS 3603 Special Operating Instructions

Text of the manual

LS 3603-I265A Special Operating Instructions

(73-13583-265) Revision B: June 2000 Special Operating Instructions

LS 3603-I265A Special Operating Instructions

(73-13583-265) Revision B: June 2000 2 The LS 3603-I265A acknowledges and exe- cutes RS-232 parameter configuration com- mands, beeper control commands, and LED control commands. The scanner contains custom parameter de- faults provided in the Parameter Definition Ta- bles. The new Continuous Laser On parameter pu

LS 3603-I265A Special Operating Instructions

(73-13583-265) Revision B: June 2000 3 <..more commands if applicable..> Where: STX = 02h L1,L2,L3 = Three byte hexadecimal length of data from STX - LRC. Each byte of the hexadecimal length is sent as an ASCII character. For example, a length of 13 decimal = 00D

LS 3603-I265A Special Operating Instructions

(73-13583-265) Revision B: June 2000 4 used to identify value of param- eter. Host Commands Table 1: Host Commands Value Hex Rep. Command Scanner Response 0 30h Change Single Parameter If valid, the specified parameter is changed to the downloaded value and an ACK String is sent to the host. 1 31h Change a Group o

LS 3603-I265A Special Operating Instructions

(73-13583-265) Revision B: June 2000 5 Any other value for a host command causes an error condition and a NAK string is transmit- ted. Note: The parameter commands only affect the RS-232 host parameters; not the wand or Synapse host parameters. The LS 3603 accepts multiple single and group parameter change command

LS 3603-I265A Special Operating Instructions

(73-13583-265) Revision A: July 1999 6 Table 2: Host Message for Single Host Commands with No Variable Data Com- mand STX Host mess L1 Host mess L2 Host mess L3 Host cmd L1 Host cmd L2 Host cmd L3 Host cmd Par. grp Par. ID1 Par. ID2 Par. val ETX LRC Reset Defaults stx 02H 0 30H 0 30H E 45H 0 30H 0 30H 5 35H 3 33H

LS 3603-I265A Special Operating Instructions

(73-13583-265) Revision B: June 2000 7 Note: All n/a fields must contain a 00h value. Multiple host commands are verified and exe- cuted until an error occurs. Once an error oc- curs a NAK STRING is sent to the host and further commands are ignored. More specifi- cally, if a host message is sent to the scanner tha

LS 3603-I265A Special Operating Instructions

(73-13583-265) Revision B: June 2000 8 If the user downloaded a host message that contained two host command strings, one to change a single parameter and one to change a group of parameters, the ACK String data would be 01 (30h,31h) to represent the single (command 0) and group (command 1) com- mands. The ACK Str

LS 3603-I265A Special Operating Instructions

(73-13583-265) Revision B: June 2000 9 = The three byte error location indicates which byte of the download caused the error. When determining the error location the received STX is considered loca- tion one. For example, if a 14-character download mes- sage was transmitted a

Other Barcode Reader Manuals