DeWalt DCE089G Quick Start Manual
Text of DeWalt DCE089G Quick Start Manual
DCE089G, DCE089R: 3 x 360° Line Laser
DCE0811G, DCE0811R: 2 x 360° Line Laser
DOC100270393
GB
NL
GR
I
FIN
D
DK
E
NO
F
SE
PT
TR
Quick Start Guide
2
3
180°
OR
1A
1B
1C
2
1D
3
4
5
7
8
a
b
30°
-30°
9
6A
6B
A
A
B
C
D
D
E
F
F
J
G
E
H
I
K
M
L
N
• Product Overview
• Batteries and Power
• Operation
• Accuracy Check and Calibration
• Specifications
User Safety
Definitions: Safety Guidelines
The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to these
symbols.
DANGER: Indicates an imminently hazardous
situation which, if not avoided, will result in death or
serious injury.
WARNING: Indic
To install batteries:
•
Lift up the battery compartment cover as shown in
Figure 6A .
•
Insert four fresh AA batteries in the compartment, placing
the batteries according to (+) and (–) on the inside of the
compartment.
•
Install the AA starter Battery pack as shown in Figure 6B .
Using the 10.8V DEWALT Rechargeable
Pack:
•
Install the 10.8V Battery pack as shown in
Figure 6B .
WARNING:
Batteries can explode, or leak, and can
To maintain the accuracy of your work, check the laser often
to make sure it is properly calibrated. See Field Calibration
Check.
•
Calibration checks and other maintenance repairs may be
performed by DeWALT service centers.
•
When not in use, store the laser in the kit box provided. Do
not store your laser at temperatures below -20 ˚C (-5 ˚F ) or
above 60 ˚C (140 ˚F).
•
Do not store your laser in the kit
The Laser Beams Will Not Stop Moving
The laser is a precision instrument. Therefore, if it is not
positioned on a stable (and motionless) surface, the laser will
continue to try to find level. If the beam will not stop moving, try
placing the laser on a more stable surface. Also, try to make
sure that the surface is relatively flat, so that the laser is stable.
The Battery Meter Led’s Flash
When all 4 LED’s continuously flash on th