MXN MXN-P7D Owner's Manual

ALL ROUND VISION MONITOR Model: MXN-P7D Design and specifications are subject to change without notice. OWNER’S MANUAL PLEASE READ CAREFULLY BEFORE USING THIS PRODUCT. ...

Normal/Mirror Auto Picture Scan Camera Trigger Distance Marker Adjust Scan ON/OFF Function Lock ON/OFF Function Installation MONITOR installation with Stand bracket & Sunvisor Installation of heavy duty mounting brackets Specification 03 11 04 05 0 ...

3 ▣ PACKAGE CONTENTS MONITOR SUNVISOR STAND BRACKET MANUAL BRACKET SCREWS CABLE CLIP ITEM Q’TY MONITOR 1 SUNVISOR 1 STAND BRACKET 1 BRACKET SCREW 3 CABLE CLIP 2 CAMERA INPUT CABLE 1 MANUAL 1 CAMERA INPUT CABLE ...

4 ▣ OPERATION RIGHT POWER SELECT DOWN MENU HEATER LAMP DAY/NIGHT SENSOR (CDS) LEFT UP Press [RIGHT] button to adjust monitor volume. Use [RIGHT] button to change OSD setting during system setting. Press [POWER] button to turn on/off the monitor. Press [SELECT] button to select the respective camera channel. (CAM1-CAM2-CAM3-CAM1.. ...

5 ▣ SYSTEM SETTING DIMMER (Automatic Brightness Control) Select AUTO or OFF to have Automatic or Manual brightness of the monitor. REMARK: By activating DIMMER AUTO function, the monitor adjusts the brightness according to the environment. NIGHT BRIGHT Select the DIMMER to『AUTO』, set the value of backlight on NIGHT mode. LANGUA ...

6 ▣ SYSTEM SETTING Press [LEFT/RIGHT] button to adjust preferred PICTURE of the monitor. TRIG. DELAY When a TRIGGER wire is connected to a pulse DC power signal (e.g. direction indicator lights) then the [TRIGGER DELAY] function avoids repeating ON/OFF of the monitor. CAMERA NAME CAMERA NAME can be selected as CAM1, 2, 3/REAR/LEF ...

7 NORMAL/MIRROR Each camera picture (CAM1/CAM2/CAM3) can be switchable as NORMAL/MIRROR image. UP/DOWN Camera pictures can be switchable as UP/DOWN image. Each scanning time of CAM1/CAM2/CAM3 can be selected. REMARK: If the SCAN TIME is set as『0』, monitor skips its channel during the scanning. Press [UP] button for 4 seconds to A ...

8 TRIGGER 1/2/3 (Trigger source selection) Select the required trigger source at CAM1/CAM2/CAM3. REMARK TRIGGER PRIORITY: TRIGGER 1 > TRIGGER 2 > TRIGGER 3 CAM1 DIST. MARKER Select ON to have distance marker (parking line) for CAM1. Distance marker is displayed as soon as TRIGGER 1 signal is activated. SPEED SWITCH The orange wire ...

9 User can adjust location of distance marker. At Power ON mode, select distance marker by pressing [UP/DOWN] buttons. When color of distance markers is seen as RED color, user can adjust the lines UP/DOWN or LEFT/RIGHT. When both color of distance markers are seen as RED color, both lines can be adjusted LEFT/ RIGHT. When left color ...

10 At Power-ON mode, hold [UP] buttons pressed for 4 seconds to activate Auto Scan Picture function. During the auto scanning mode, press [UP] button for 4 seconds to inactivate Auto Scan Picture function. LOCK ON/OFF FUNCTION The set up menu can be locked as prevention against unauthorized users. LOCK ON mode At Power-ON mode, hol ...