Sealey 150XL.V3 Instructions Manual

Text of Sealey 150XL.V3 Instructions Manual

This instruction manual contains the information required to prepare your arc welding set for welding. For Individual model specifications refer to

part 2. The instructions are not intended to show you how to become a welder. If you have no experience, we recommend that you seek training from an expert source. Arc welding is re

DESCRIPTION & SPECIFICATIONS

gases or substances may explode or burn. Materials cleaned with chlorinated solvents, or varnished surfaces pose danger of toxic fumes. " Keep unauthorised persons at a safe distance from the work area. Persons within the work area are subject to the same dangers as the welder and must take the same precautions. % DO NOT weld

CONTROLS & SYMBOLS

3.3. Where necessary assemble wheels, handle & feet according to the model supplied.(figs 1a,1b,) 3.3. Where necessary assemble the work clamp supplied with your model to the cable associated with the work collet symbol as indicated below. 3.5. Where necessary assemble the electrode holder supplied with your model to the cable associate

! WARNING! Ensure the welder is disconnected from the electrical mains power supply before attempting any service or maintenance

tasks outlined below. 6.1. Keep the welder clean and dry at all times. Use a dry cloth to clean the unit. 6.2. Keep all electrodes clean and ensure all cables are in good condition. 6.3 Inspect the welder regularly,

Sealey Welding System Owners Instructions: