Velleman DVBTR2 Operation & User’s Manual
Text of the manual
1 IR se
2 powe
3 signa
1 infrar
2 voedi
3 signa
1 œil in
2 LED d
3 LED d
1 senso
2 LED d
3 LED d
1 IR-Se
2 Strom
3 Signa
Due to con
items and
Door voort
weergegev
En raison d
options pe
Debido a la
y las opcio
manual de
Durch stän
angezeigte
Bedienung
nsor
r LED
l LED
roodoog
ngsled
alled
nfrarouge
d’alimentation
du signal
or IR
de alimentaci�
To all res
Importan
This
dev
unit
spe
distributor
If in doub
Thank you
this device
and contac
The DVBT
Optional an
ANTDVBT6
2. Saf
K
A
s
b
T
a
3. Gen
Refer to th
manual.
• Familiar
• All modi
by user
• Only use
unautho
• Damage
by the w
defects
roduction
idents of the Eur
nt environmental
s symbol on the de
vice after its lifecyc
t
Refer to the illustration on page 2 of this manual.
• Connect a DVB-antenna (not incl.) to the antenna input [5].
• Connect the SCART output [6] to a suitable SCART input (cable not incl.).
• Connect the DC plug of the included power adaptor to the 12VDC input [4] and
plug the adaptor into a suitable ma
to switch between 1 and 2. Use the
and
buttons to
change the channel (1), use
or
to browse the program schedule (2).
• Use the red or green button to switch between daily and weekly view.
• View additional program information (when available) by pressing the yellow
button.
• Configure program timer
• Use the
and
buttons to select Installation and press OK. Default
password is 0000.
• Area search: will focus on searching for know frequencies in a certain area.
Default, this area is set to Taiwan. This can be changed under channel
manager (see below).
• Manual search: enter the frequency and ba
• After entering a character, wait ±5s until the cursor moves to the next space.
• When selecting Lock (blue button), enter a 4 number password to unlock the
channel. When delete is selected, the system will prompt for confirmation.
• Press EXIT to return to Channel Manager.
• Using Channel sorting, finding channels
• Use the
and
buttons to move up and down in the menu or list, use
or
button to select an item. Press OK to confirm:
On Screen Display (OSD)
• Set up the user interface via the OSD menu option.
o OSD: select an OSD colour scheme.
o Time on OSD: set time display on OSD on or off
o OSD timeout: set time-out for on-scre
• Set time and date.
o Timer mode: Auto (get time-stamp from DVB signal, default) or Manual
o Date: set date (only when in Manual timer mode). In calendar mode, press
the INFO button for shortcuts.
o Time: set time (only when in Manual timer mode. Use the numeric keys on
the remote control.
o GMT offset: set time zone