Contour Next Link 2.4 Operation & User’s Manual

Bolus Basal 5.2mmol/L BG 12:00 PM ® 5.2 mmol L Before Meal 12:00 PM l 10/13 Bolus Reminder Notes ® USER GUIDE Uses only CONTOUR®NEXT blood glucose test strips Wireless Blood Glucose Monitoring System 81552940_CntrNextLINK2_4_UG_EN_FpBp_v6.indd ofc1 9/16/16 1:00 PM ...

• Always dispose of test strips and lancets as medical waste or as advised by your health care professional. All products that come in contact with human blood should be handled as if capable of transmitting infectious diseases. PRECAUTIONS • Read your CONTOUR®NEXT LINK 2.4 user guide, the lancing device package insert, your MiniMed® pump user guide and all instr ...

Your CONTOUR®NEXT LINK 2.4 Wireless Blood Glucose Monitoring System .........................................................................................................3 Your CONTOUR®NEXT Test Strip .......................................................................................3 Initial Setup ............................................................ ...

5.2 Bolus Reminder Notes Selection/Scrolling Buttons See page 5 Display Screen Meter USB Plug Top Menu Button See page 4 Protective USB Cap Your CONTOUR NEXT Test Strip Sample Tip Blood sample pulled in here. Getting Started Your CONTOUR®NEXT LINK 2.4 Wireless Blood Glucose Monitoring System The CONTOUR NEXT LINK 2.4 wireless blood glucose monitoring system works with CONTOUR®NEXT test str ...

button to scroll to your desired selection. When your choice is highlighted, press OK. Turn On Initial Setup • The three buttons next to the screen allow you to make your selection by pressing the button next to your choice. • Scroll up or down for additional choices when the � or � arrows appear on the me ...

to scroll to Device Options. Press Select button . 9. In the Device Options menu, scroll to Connect Device. Press Select button . 10. Place the meter and pump next to each other. Select Auto Connect on your pump. Select Auto Connect on your meter. If you select Manual Connect, see page 38. Connect to Pump ...

When the pump links to the meter, the SN on the meter screen will change to a different serial number. This number is the pump SN. 14. Turn the pump over. Check that the SN on the back of the pump matches the pump serial number now on the meter screen. The Manage Devices screen appears on your pump. 15. The ...

your Target Ranges next. Accept Change HIGH AND LOW ALERTS High: 13.9 mmol/L Low: 3.9 mmol/L Your meter comes preset with a high alert level of 13.9 mmol/L and a low alert level of 3.9 mmol/L. You can Accept or Change these levels. NOTE: Alerts can only be set outside your selected Target Range(s). For additional information, you may contact Customer Se ...

Read your CONTOUR®NEXT LINK 2.4 user guide, your MiniMed insulin pump user guide, the lancing device insert and all instructional materials provided in your meter kit before testing. Please follow all instructions for use and care exactly as described. Examine product for missing, damaged, or broken parts. If the test strip bottle is open inside a new box of strips, do not use those strips. Contact Customer Serv ...

3. Insert the grey square end into the test strip port until the meter beeps (if the Sound is set to ON). Getting the Blood Drop — Fingertip Testing You will see the Apply Blood screen. The meter is now ready for you to test. NOTE: After test strip is inserted, if you do not apply blood to the test strip within 1 minute, the meter screen will dim and the meter will bee ...

going without food and sugared drink for 8 hours. Before Meal The Before Meal marker can be used when testing blood sugar levels within 1 hour before a meal. After Meal The After Meal marker can be used when testing blood sugar levels within 2 hours after a meal. No Mark You can select No Mark if you are tes ...

meter beeps. Do not press the tip against the skin or place the blood on top of the test strip or you could get inaccurate results or errors. STRIP UNDERFILLED APPLY MORE BLOOD NOW If the first blood drop is not enough, the meter will beep twice and display “ STRIP UNDERFILLED” and “APPLY MORE BLOOD NOW.” You have about 30 seconds to apply more blood to the same strip. Too Li ...

• Always dispose of test strip and lancet as medical waste or as advised by your health care professional. All products that come in contact with human blood should be handled as if capable of transmitting infectious diseases. • Please refer to your lancing device package insert for instructions on how to properly remove and dispose of the lancet. WARNING You should consult your health care professional for glu ...

• Do not calculate a bolus based on a control result WARNING Shake the control solution well before testing. Control Solution Testing Control Solution* Testing CAUTION: Check the expiry date on the test strip bottle and the expiry date and discard date on the control solution bottle. DO NOT use expired materials. Quality Control Normal, ...

Features Your CONTOUR®NEXT LINK 2.4 meter includes many testing features. AutoLog (Marking Your Results) Your meter comes with an AutoLog feature that lets you mark your test result as Fasting, Before Meal, After Meal and No Mark. Your meter comes with AutoLog OFF. If you would like to see your resul ...

OK 7. A confirmation screen appears on both your meter and your pump. Bolus Total Stop Bolus Basal 10:00 PM mmol/L 9.3 NOTE: Verify that the bolus amount shown on your meter matches the total amount shown on your pump. Preset Bolus First, follow Steps 1, 2 and 3 on page 26. 4. Next, choose the Preset Bolus you wish to send to your pump. NOTE: Preset bolus is s ...

Change Done Changing a Reminder Time 1. Press the L or M button to select the correct hours and minutes (in 15-minute increments). Changing a Reminder Time 2. Press OK after each selection. A screen confirms the Reminder Countdown time. When the Reminder feature is on, the clock symbol appears in the headers on the Setup and Main Menu screens. The meter retains the remi ...

11/06/09 10:30 PM END OF LOGBOOK 4.2 mmol L Sent, After Meal 11/05/09 11:24 PM Using the Main Menu The Main Menu has 4 choices: Bolus, Logbook, Trends and Setup. To select one, press the � or � button to scroll to your desired selection. When your choice is highlighted, press OK. OK Bolus Logbook Trends Setup MENU Bolus Bolus The Bolus function allows you to send a Manual or Preset Bolus ...

14 DAY RESULTS AVERAGE 9.7 Results: 115 mmol L Setup You can view and change options on your meter and personalize it from the Setup Menu. 1. Press and hold the top Menu button to turn the meter on. 2. Press the M button to highlight Setup. Press OK to select. OK SETUP Pump Options Reminder Date Time Sound AutoLog Target Trends Range High and Low Alerts Language Customer S ...

Before using Auto Connect, be sure no other nearby Medtronic devices New Device See User Guide to connect new device. Select Search below when ready. Search CONNECT TO PUMP Searching... Cancel The search may take up to 2 minutes. Searching... Start search on new device. Search may take up to 2 minutes. 10. Read the pump screen. Be sure other ...