Gator G700CK Instruction Manual

Text of Gator G700CK Instruction Manual

G700CK Instruction Manual

Installation: The video signal is transferred from the camera to the monitor via 4 pin cable that will need to be run from the rear through to the front of the vehicle to the monitors wired loom run under the dash. From there the video signals are sent directly to the monitor. At the rear of the Vehicle, connect the reverse trigger wire from the loom and connect to the Positive wire of the reverse tail light. This will enable the

OSD Menu Function Description:

- Brightness :Adjusts screen Brightness (0% - 100%) - Contrast : Adjusts screen Contrast (0% - 100%) - Colour: Adjusts screen Saturation (0% - 100%) - Zoom : Changes display mode between 4:3 & 16:9 - Tcon (Rotate) : Adjust Screen image Left, Right, Up or Down to suit installation - Language : Select Menu Language - Reset : Resets all menu setting back to Factory configuration SPECIFICATIONS Aspect ratio: 16:9 Pixels: 800*RGB*

Gator Monitor Owners Instructions: