Alpha FlexPoint 1208-F Quick Start Manual

FlexPoint™ 1208-F Quick Start Guide FTTx UPS System for ONTs Fig. 1, System Block Diagram Review the drawings and illustrations contained in this guide before proceeding. For additional details on installation and operation, visit www.alpha.com and download a copy of the FlexPoint TM 1208-F Series Technical Manual (p/n 010-353-B0). The FlexPoint 1208-F unit is an RFoG power supply providing 12Vdc primary and standby power. A customer- provided 90Vac to 264Vac, 50/60Hz power receptacle provide ...

1. Press finger tab to release battery cover and connect the wire harness to the battery. 2. Install the battery into the compartment ensuring the battery retaining clip secures the battery (for batteries up to 8Ah). 3. Replace the battery cover. 4. Plug the unit into AC power. The green AC PRESENT LED should illuminate. 5. Verify proper function by unplugging the AC line cord from the AC receptacle. Within approximately 30 seconds the alarm should sound for 1 second (it may take longer to trigger this alarm if the load is very light or not connected). AC mode LED (Green) will display then turn ...