ABB TGS 40 Operating Instructions Manual
Text of ABB TGS 40 Operating Instructions Manual
Position Transmitter TGS 40 (RAM)
42/14-50 EN
Position Transmitter TGS 40 (RAM)
Operating Instructions
Document no.
42/14-50 EN
Date of issue:
10.05
Manufacturer:
ABB Automation Products GmbH
Borsigstr. 2
63755 Alzenau
Germany
Tel:
+49 551 905-534
Fax:
+49 551 905-555
[email protected]
© Copyright 2005 by ABB Automation Products GmbH
Modificati
Position Transmitter TGS 40 (RAM)
3
Table of contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page
Important information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Position Transmitter TGS 40 (RAM)
42/14-50 EN
Important information
Symbols
In order that you can make the best use of this document and to ensure safety during commissioning, operation
and maintenance of the equipment, please note the following explanation of the symbols used.
Explanation of the symbols used.
As well as the instruction
Position Transmitter TGS 40 (RAM)
5
2
Description
2.1
Application
Conversion of the angular position of a shaft into a load-independent DC signal e. g. for position measurement
on relief valves with high temperature.
2.2
Function and system design
The angular position is transmitted from the sensor shaft, e.g. of a relief valve, by a
Position Transmitter TGS 40 (RAM)
42/14-50 EN
2.4
Connection diagrams
Fig. 2-2
Connection diagram
2.5
Dimensional drawings (dimensions in mm)
2 x Büschelstecker/Brush pin
4 mm (schwarz/black)
Bürklin-Bestellnr./Order No.: 15 F 230
1 x Kupplung/Coupling
∅
∅4 mm (schwarz/black)
Bürklin-Bestellnr./Order No.: 20 F 100
Kabellänge / cable len