ABB 6X1EH Operating Instructions Manual

Text of ABB 6X1EH Operating Instructions Manual

- 1 -

600T EN Series HART Pressure Transmitters Models 6X1ED - EE - EH - EG - EA Models 622ED, 6X1ES Operating instructions

- 2 -

Health and Safety To ensure that our products are safe and without risk to health, the following points must be noted: 1. The relevant sections of these instructions must be read carefully before proceeding. 2. Warning labels on containers and packages must be observed. 3. Installation, operation, maintenance and servicing must only be carried out by

- 3 -

Section Page INTRODUCTION............................................................ 3 TRANSPORT, STORAGE, HANDLING AND PRODUCT IDENTIFICATION ........................................ 4 PRINCIPLE OF OPERATION ........................................ 5 INSTALLATION.............................................................. 7 ELECTRICAL CONNECTIONS .

- 4 -

Important - The instrument serial number must always be quoted when making enquiries. PRODUCT IDENTIFICATION The instrument is identified by the data plates shown in Figure 1. The Nameplate (ref.A) provides information concerning the code number, maximum working pressure, range and span limits , power supply and output signal. See co

- 5 -

The instrument consists of two functional units: - Primary Unit - Secondary Unit The Primary Unit includes the process interface and the sensor, the Secondary Unit includes the electronics, the terminal block and the housing. The two units are mechanically coupled by a threaded joint. The Electronics of Secondary Unit is based on custom integrated

ABB Transmitter Owners Instructions: