SENSIT Technologies Trak-It IIIa Quick Start Instructions
Text of SENSIT Technologies Trak-It IIIa Quick Start Instructions
HINT: Using the Bar Hole feature greatly
speeds locating underground leaks. The
pump runs at a much higher flow during this
function.
IMPORTANT: Always use external filter at
intake to protect pump.
WARNINGS:
To prevent the risk of ignition of flammable
atmospheres, batteries must only be changed in
an area known to be non-hazardous.
1. Install the batteries by removing the
instrument from the pouch and removing
the battery cover from the bottom of the
instrument.
2. IMPORTANT: CAREFULLY OBSERVE
POLARITY WHEN CHANGING BATTERIES.
Improperly installed batteries will cause the
instrument not to operate.
3. Locate button “A” – push & hold until the
unit powers up, then release the powe