SENSIT Technologies HXG-3P Quick Start Instructions

Text of SENSIT Technologies HXG-3P Quick Start Instructions

HINT: As you approach the source of the

leak, keep dialing down the rate of the audible “tick” by dialing down the thumb wheel which is located on the right side of the instrument. IMPORTANT: When replacing the gooseneck into the clip on the right side, wrap the gooseneck in a wide circular manner counter-clockwise around the bac

1. Install the batteries by removing the

retaining screw (torx) from the handle. Push down the locking tab and slide the handle away from the top of the instrument. When replacing handle be sure the tab is securely in place and replace the retaining screw. 2. IMPORTANT: CAREFULLY OBSERVE POLARITY WHEN CHANGING BATTERIES. Incorrect installation can damage an

SENSIT Technologies Measuring Instruments Owners Instructions: