SENSIT Technologies CO Quick Start Instructions
Text of SENSIT Technologies CO Quick Start Instructions
IMPORTANT: After testing flue samples
it may be necessary to remove condensate
collected in the water/particle filter that is
included with the probe.
WARNINGS:
To prevent ignition of flammable or
combustible atmospheres, disconnect power
before servicing.
Always change batteries in an environment
free of combustible gases.
Do not ha
1. Install the batteries by pushing down
the locking tab and sliding the handle
away from the top of the instrument. When
replacing handle be sure the tab is securely
in place.
2. IMPORTANT: CAREFULLY OBSERVE
POLARITY WHEN CHANGING BATTERIES.
Incorrect installation can damage an internal
“factory service only” fuse.
3. Locate button “A” – push & ho