Schmidt KLA Installation And Operating Instructions Manual
Text of Schmidt KLA Installation And Operating Instructions Manual
Schmidt Mess- und Regeltechnik
1
©2010 Schmidt Mess- und Regeltechnik
Fon 0 67 32 - 91 91 20 Fax 0 67 32 - 96 24 42
[email protected]
Installation and Operating Instructions
Flap-Type Flow Meter KLA
Schmidt Mess- und Regeltechnik
2
©2010 Schmidt Mess- und Regeltechnik
Fon 0 67 32 - 91 91 20 Fax 0 67 32 - 96 24 42
[email protected]
Installation and Operating Instructions
Flap-Type Flow Meter KLA
Inhaltsverzeichnis
1.
Foreword
3
2.
2.1.
2.2.
2.3.
2.4.
2.5.
2.6.
2.7.
3.
4.
4.1.
4.2.
Installation KLA
6
10.2.
Technical Data of Limit Switches
11
5..
6.
7.
7.1.
8.
9.
9.1.
10.
10.1.
Safety
3
Symbol and Meaning
3
General Safety Directions and
Schmidt Mess- und Regeltechnik
3
©2010 Schmidt Mess- und Regeltechnik
Fon 0 67 32 - 91 91 20 Fax 0 67 32 - 96 24 42
[email protected]
Installation and Operating Instructions
Flap-Type Flow Meter KLA
1. Foreword
These Installation and Operating Instructions are applicable to devices of Series KLA. Please
follow all instructions and information given for installation, operation, inspection and maintenance.
The instructions form a component
Schmidt Mess- und Regeltechnik
4
©2010 Schmidt Mess- und Regeltechnik
Fon 0 67 32 - 91 91 20 Fax 0 67 32 - 96 24 42
[email protected]
Installation and Operating Instructions
Flap-Type Flow Meter KLA
2.5. Information for Operator and Operating Personnel
Authorized installation, operating, inspection and maintenance personnel should be suitable
qualified for the jobs assigned to them, and should receive appropriate training and instruction.
Schmidt Mess- und Regeltechnik
5
©2010 Schmidt Mess- und Regeltechnik
Fon 0 67 32 - 91 91 20 Fax 0 67 32 - 96 24 42
[email protected]
Installation and Operating Instructions
Flap-Type Flow Meter KLA
Figure 1 shows correct installation of the device. The scale faces the front.
Figure 1
Viewing direction
In Figure 2 the device has been installed incorrectly. The scale faces upwards.
Figure 1
Viewing direction
Schmidt Mess- und Regeltechnik
6
©2010 Schmidt Mess- und Regeltechnik
Fon 0 67 32 - 91 91 20 Fax 0 67 32 - 96 24 42
[email protected]
Installation and Operating Instructions
Flap-Type Flow Meter KLA
4.2. Installation KLA
For mounting, provide the connection flanges of the KLA with suitable flat gaskets. The gaskets are
not included with the flow meter.
Before installing, remove the transport lock from inside the device, and fit the open p
Schmidt Mess- und Regeltechnik
7
©2010 Schmidt Mess- und Regeltechnik
Fon 0 67 32 - 91 91 20 Fax 0 67 32 - 96 24 42
[email protected]
Installation and Operating Instructions
Flap-Type Flow Meter KLA
7.1. Connecting the Limit Switches.
•
Electrical connection of the device should be carried out in conformity with the
relevant VDE regulations [or equivalent national standards] and in compliance with
the regulations issued by your local po
Schmidt Mess- und Regeltechnik
8
©2010 Schmidt Mess- und Regeltechnik
Fon 0 67 32 - 91 91 20 Fax 0 67 32 - 96 24 42
[email protected]
Installation and Operating Instructions
Flap-Type Flow Meter KLA
10. Technical Data
Connection
to DIN 2501
optionally: ASA 150 lbs
Pressure rating
PN 10 [standard] or PN 6 [special version]
Cast steel: PN25
Fitting dimensions
DN 25 – 200 / ½“ – 8“
Mounting length
See Table
Corrosion protection
Epox
Schmidt Mess- und Regeltechnik
9
©2010 Schmidt Mess- und Regeltechnik
Fon 0 67 32 - 91 91 20 Fax 0 67 32 - 96 24 42
[email protected]
Installation and Operating Instructions
Flap-Type Flow Meter KLA
Materials
Type/device
Flap
Bearings
Plate
Blind flanges
Gasket
DN
KLA Standard
15 - 150
Grey cast iron
Rg 5
1.4571
1.4571
Grey cast iron/
steel
NBR
32 - 150
Welded steel
Rg 5
1.4571
1.4571
Steel
NBR
200
KLA GS
Ring
Grey cast iron
1.4571
1.4571