QMotion QIS Application Manual

Text of QMotion QIS Application Manual

Qadvanced Intelligent System (QIS)

System Overview Power Supply: 24 VDC, 7.5A RJ‐45 Ports for Motorized Shades and Switches  ‐  Quan�ty 8 Communica�on Ports (RJ‐45)  ‐ Quan�ty 2 PN 9000233

The Qadvanced Intelligent System offers three methods for Shade Control:

Hardwire control: Uses standard Cat5e or Cat6 cable for both power and communication. Controlled via hardwired wall switches. ZigBee HA1.2: Uses standard Cat5e or Cat6 cable for power. Wireless communication via ZigBee HA1.2 specification. Supports stand alone applications or ZigBee HA1.2 network applications that are easily integrated with 3rd party control s

Category 5e/Category 6 for

use with RJ-45 Connector  24 AWG  Maximum length of wire from Power/Communication Panel to device: - Up to an 8’ X 8’ Shade with 40:1 motor - 1250 feet - 8’ X 8’ to 12’ X 12’ Shade with 73:1 motor - 750’ feet - Hardwired 4 and 8 Button Switches - 1000’ feet from switch to far

8 RJ-45 ports for motorized shades and switches

 2 additional RJ-45 communication ports dedicated to daisy chain with other Power/Communication Panels and Third Party Integration via RS485.  Power Supply - AC Input: 100-240 VAC, 2.5A - DC Output: 24 VDC, 7.5A Note:  Standard Roll Applications (Motor Left) - Wire will need to be run to the LEFT side of the window (as show

Category 5e/Category 6 for use with RJ-45 Connector

 24 AWG  Maximum length of wire from Power/Communication Panel to device : - Up to an 8’ X 8’ Shade with 40:1 motor - 1250 feet - 8’ X 8’ to 12’ X 12’ Shade with 73:1 motor - 750 feet - Hardwired 4 and 8 Button Switches - 1000 feet from switch to farthest power panel *Length based on 115K baud rat
Qadvanced Intelligent System (QIS) Third Party Integration with Hardwired Switch and ZigBee HA1.2 24 VDC Power Supplies 24 VDC Power Supplies Hardwired Switch RS485 Communication NOTE: The Qadvanced Intelligent System does not operate on “standard” Power over Ethernet (PoE) schemes. Do not attempt to connect the Qadvanced Intelligent System to any PoE device. Doing so may damage the system components and/or the extern

Warning: Changes or modifications to this device not expressly approved by QMotion® Incorporated -Advanced

Shading Systems could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a resi

QMotion Indoor Furnishing Owners Instructions: