QMotion ZigBee HA 1.2 Programming Instructions
Text of QMotion ZigBee HA 1.2 Programming Instructions
www.qmotionshades.com Pensacola FL, 32514 1 -877-849-6070 1
PN 9000223
CREATE A NEW NETWORK (Qube)
1. Plug Qube into network router.
*Qube light will blink red while looking for updates, then
will turn solid GREEN when ready to be set up
2. INSTALL QMotion App for ZigBee HA1.2
__(visit Google Play / iOS App Store)
3. Follow directions on App to set up the Qube
4. INSTALL SHADE following appropriate instructions
ADD QMO
www.qmotionshades.com Pensacola FL, 32514 1 -877-849-6070 2
PN 9000223
ADD REMOTE TO NETWORK (QdR Remote)
1. In the QMotion App, go to “ADD DEVICES” page and
__scan for devices
2. PULL BATTERY TAB from the remote and PRESS ANY
__BUTTON
(Lights on the remote will grow from left to right, until added)
3. Lights will blink five times quickly when added to the
network.
4. Using the QMotion App, name and add the remote to
www.qmotionshades.com Pensacola FL, 32514 1 -877-849-6070 3
PN 9000223
UNLEARN A REMOTE FROM SHADE
(Shade must be at Upper Limit)
1. PRESS and RELEASE the CHANNEL button to
select the channel currently paired to the shade
2. Use a paperclip to PRESS the PROGRAM button on
__back of the remote
3. PRESS and RELEASE the DOWN button
__(Shade will JOG in response)
4. TUG the shade 6-10 inches
__(Shade will JOG and move to the Uppe