Moxa Technologies EOM-104 Series Quick Installation Manual

Moxa Embedded Ethernet Switch Module Edition 4.1, March 2018 Technical Support Contact Information www.moxa.com/support Moxa Americas: Toll-free: 1-888-669-2872 Tel: 1-714-528-6777 Fax: 1-714-528-6778 Moxa China (Shanghai office): Toll-free: 800-820-5036 Tel: +86-21-5258-9955 Fax: +86-21-525 ...

Overview The EOM-104 Series Ethernet switch module provides an easy, cost-effective, and integrated solution for device manufacturers to embed an Ethernet switch module into an existing product for enhanced performance and reliability. The module supports 10/100 Mbps Fast Ethernet, and comes with Turbo Ring’s fast recovery time of under 20 ms built i ...

Layout of the EOM-104 Series Pin Assignment JP1 (2x20 connector pin assignment) PIN 1 3 5 7 9 11 13 15 17 19 SIGNAL TX2 - RX2 - NC RX1 + TX1 + NC GND 3.3V GND DTR PIN 2 4 6 8 10 12 14 16 18 20 SIGNAL TX2 + RX2 + NC RX1 - TX1 - NC GND 3.3V GND DSR PIN 21 23 25 27 29 31 33 35 37 39 SIGNAL TXD GPIO 1 GPIO 3 MASTER ENABLE MASTER LED PORT 1 LED PORT 3 LED M ...

Layout of the Evaluation Board 1. 12 VDC Power Jack 2. Console Port 3. GPIO 4. Turbo Ring DIP Switch 5. PWR LED 6. Turbo Ring LED 7. Ring Master LED 8. Port 1 LED 9. Port 2 LED 10. Port 3 LED 11. Port 4 LED 12. Port 1 10/100BaseT(X) 13. Port 2 10/100BaseT(X) 14. Port 3 10/100BaseT(X), or 100BaseFX (Turbo Ring Port 1) 15. Port 4 10/100 BaseT(X),or 100Ba ...

Turbo Ring DIP Switch Setting ON OFF DIP1 Enable this EOM as the Ring Master This EOM will not be the Ring Master DIP2 Activate Turbo Ring Do not use Turbo Ring DIP3 GPIO Reserve GPIO Reserve DIP4 GPIO Reserve GPIO Reserve DIP5 GPIO Reserve GPIO Reserve DIP6 GPIO Reserve GPIO Reserve Specifications Technology Standards IEEE 802.3 for 10BaseT IEEE 802.3 ...