VARILITE JUNIOR Installation Instructions Manual

Text of VARILITE JUNIOR Installation Instructions Manual

This manual explains how to install, operate and maintain the VARILITE JUNIOR

Back Support. If you do not understand this instruction manual or if you have any questions, please contact VARILITE Customer Service at (800) 827-4548. BACK SUPPORT Installation Instructions

© 2013 Cascade Designs, Inc.

Installation Instructions JUNIOR Back Support Styles Page 4 WARNINGS Pages 5-8 JUNIOR Back Support Components Pages 9-10 Assembly and Mounting Page 11 Adjustment Page 12 Seat Depth Adjustment Page 13 Operation Pages 14-15 Back Cushion Adjustment Page 16 Thoracic Support Page 16 Troubleshooting Page 17 Warranty Page 18 Care and Maintenance Page 19 Contact Information Page 19 Table of Contents
© 2013 Cascade Designs, Inc. Installation Instructions JUNIOR Back Support Styles These instructions are applicable to the following JUNIOR Back Support Styles: M i d D e e p
© 2013 Cascade Designs, Inc. Installation Instructions TO AVOID INJURY, read, understand and follow all instructions and warnings in this manual before using your VARILITE back support. There are hazards associated with the use of wheelchairs and adaptive equipment. If you misuse your wheelchair or your back support you can be seriously injured. WARNING Installation and adjustment of your VARILITE back support should be performed only by an autho
© 2013 Cascade Designs, Inc. Installation Instructions VARILITE back supports are designed to be compatible with most wheelchairs, noting the following exceptions: The back supports can be used only with wheelchairs with round canes. The back support can be used only with wheelchairs with cane diameters equal to 1 in. (25 mm) or less. Wheelchairs are not required to have stabilizer bars, provided the canes can maintain their position. Failure to us
© 2013 Cascade Designs, Inc. Installation Instructions Wheelchair Compatibility Do not leave the Slide Caps in the open position. Doing so may allow the Slide Brackets to disengage from the Holsters, causing the back support to accidentally fall out, which can result in serious injury. Fig. 1 and Fig. 2. WARNING Fig. 2 Fig. 1 CORRECT INCORRECT
© 2013 Cascade Designs, Inc. Installation Instructions Failure to install and use Cane Bracket Shims as instructed can result in equipment breakage and serious injury. WARNING Fitting Cane Bracket Shims Cane Size Shim Size Included with Hardware? 7/8 in. (22 mm) 1/8 in. (3 mm) Yes 3/4 in. (19 mm) 1/4 in. (6 mm) Yes Cane Brackets are sized for 1 in. (25 mm) diameter round wheelchair canes. Shims are provided for wheelchair canes that are le
© 2013 Cascade Designs, Inc. Installation Instructions JUNIOR Back Support Components Please familiarize yourself with the parts of the back support before installation, adjustment or use. Cane Bracket Adjustor Plate Slide Cap Upholstery Slot Holster Permanent Mount Hole Holster Bracket Slide Bracket Shell Bracket Cane Hardware Components Fig. 3
© 2013 Cascade Designs, Inc. Installation Instructions Lateral Slot (Mid Shell only) JUNIOR Back Support Components Valve Self-Inflating Cushion Upholstery Patch Self-Inflating Cushion Shell Interior Fig. 5 Fig. 4
© 2013 Cascade Designs, Inc. Installation Instructions Adjustment may be necessary to complete the installation and accommodate the width of the wheelchair, or for desired seat depth, angle and height. The following steps must be done before the client is in the wheelchair: 1. Determine the optimal height of the back on the wheelchair. 2. Attach Cane Brackets to each wheelchair cane, ensuring that the Holsters face each other and the Slide Caps
© 2013 Cascade Designs, Inc. Installation Instructions The following steps can be done with or without someone in the wheelchair: Depth and Angle Adjustments 1. Loosen the two Cane Bracket Adjustment Screws and adjust for desired level of depth and angle. Only loosen adjustment screws 3/4 of a turn to slide. Do not disconnect from the attached nut. 2. Use reference marks on the top of the Holster to make incremental adjustments. 3. Adjust the har
© 2013 Cascade Designs, Inc. Installation Instructions Seat Depth Adjustment Seat depth adjustment varies according to the clinical application, specific wheelchair features, and the recline angle of the back. The JUNIOR Back hardware allows for seat depth adjustment in front of the canes to provide correct positioning or allow for recline adjustment without the shell hitting the canes. Installation Space Saver Growth Type Cane Bracket Posterior
© 2013 Cascade Designs, Inc. Installation Instructions Operation Removing the JUNIOR Back Support 1. Depress buttons and slide the left and right Slide Caps open. Fig. 11 2. Grab the top of the shell and lift up until the Slide Bars clear the Holster. Fig. 12 3. Slide the left and right Slide Caps closed, towards the shell. Fig. 13 Inserting the JUNIOR Back Support 1. Depress buttons and slide the left and right Slide Caps open, away from the shel
© 2013 Cascade Designs, Inc. Installation Instructions Permanent Mount Installation 1. Loosen the left and right Slide Bracket screws. Fig. 8 2. Install the Permanent Mount Screw using the 3-32 in. hex key through the Permanent Mount Hole into the Slide Bracket. Fig. 3 3. Tighten the left and right Slide Bracket screws. Operation
© 2013 Cascade Designs, Inc. Installation Instructions Inflating Cushion 1. To inflate cushion, remove load from cushion. 2. Open air valve by turning valve counterclockwise. 3. When cushion is fully inflated, close air valve by turning valve clockwise. Adjusting Cushion 1. To adjust the air level of the VARILITE back support, begin with the cushion fully inflated and the valve closed. 2. Position wheelchair user securely in wheelchair. 3. Turn
© 2013 Cascade Designs, Inc. Installation Instructions Troubleshooting The JUNIOR Back Support should operate smoothly. The back support should remove and insert without binding. If the back support binds or seems “sticky” during removal and insertion, quick and easy adjustments will correct the situation. 1. Check the back height. Ensure that the Cane Brackets are installed at the same height and are parallel. 2. Allow the Slide Brackets
© 2013 Cascade Designs, Inc. Installation Instructions LIMITED WARRANTY/LIMITATIONS OF REMEDIES AND LIABILITY U.S.A. and Canada Limited Warranty. VARILITE, a division of Cascade Designs, Inc., to the original owner (“Owner”), under intended use and maintenance, warrants the enclosed product (“Product”) to be free from defects in materials and workmanship for two years from date of purchase of the Product. No warranty against defects in ma
© 2013 Cascade Designs, Inc. Installation Instructions VARILITE 4000 1st Ave. S Seattle, WA 98134 Phone: (206) 505-9500 Toll Free: (800) 827-4548 Fax: (206) 343-5795 Toll Free Fax: (800) 363-7739 Email: [email protected] Website: www.varilite.com Customer Service Hours: Monday through Friday from 7:00 AM to 4:30 PM Pacific Standard Time (PST) Contact Information A Division of Cascade Designs, Inc. 4000 1st Ave. S Seattle, WA 98134 Phone: (800) 8

VARILITE Wheelchair Owners Instructions: