SENSIT Technologies IRED Quick Start Instructions
Text of SENSIT Technologies IRED Quick Start Instructions
NOTE: Start in a gas-free environment
IMPORTANT: Periodically test using known
samples of gas from 10ppm Ethane/1000ppm
Methane mix bottle.
WARNINGS:
To prevent the risk of ignition of a flammable
atmosphere, batteries must only be changed in
an area known to be non-hazardous.
To prevent ignition of flammable or combustible
atmosphe
1. Install a fully charged battery pack by aligning
the top of the battery with the latches in the
instrument housing. Lower the bottom of the
battery into place. Use the ¼ turn locking
screws to secure the battery pack in place.
2. Be
certain
the
filter
assembly
has
a
filter
disc
within
the
housing.
3. Locate button “A” – press & hold until the