Hideaway Beds SwingAway Assembly Instructions Manual
Text of Hideaway Beds SwingAway Assembly Instructions Manual
T: 01752 511111
[email protected]
Unit 1, Bluewater Estate, Bell Close, Plympton, Devon, PL7 4JH
SwingAway Horizontal Wall Bed Assembly Instructions
Issued 20/07/10, Hideaway Beds Ltd
Updated: 3/5/11, 2/3/12, 19/05/16, 13/07/17
By using this guide, you hereby agree to the following:
Our own patent internationally protects all manufactured items. Your statutory rights as a consumer
are not affected. Please note that we practice a poli
2 | P a g e
All rights reserved. O&OE. © Hideaway Beds 2017.
Introduction
The SwingAway (CEHNT) systems are vertically and horizontally mounted wall beds that stand alone on
their own sub-frame, which must be fixed to the floor and wall. The bed can be mounted in a recess or
cabinet using bi-folding doors/similar or concealed using a curtain etc. or left on view. NOTE: Doors
cannot be fixed to the base of a SwingAway Bed. The counter balanced mechanism
3 | P a g e
All rights reserved. O&OE. © Hideaway Beds 2017.
Instructions
1.
Join the 2 x part bed frame ‘A’ & ‘B’ together using ‘C’ & ‘D’. (fig 2)
2.
Bolt the counterbalanced units ‘E’ & ‘F’ to the sub-frames ‘H’ & ‘I’ ensuring that ‘H’ is located
at the front and that the lug is on the left hand side. (fig 1)
3.
Before tightening the nuts, connect the angled wall brackets ‘G’ to the top rear bolts on the sub-
fra
5 | P a g e
All rights reserved. O&OE. © Hideaway Beds 2017.
Important note: Please ensure joining bars ‘C’ & ‘D’ are correctly oriented with the flat section facing
outwards. Failure to do so may cause weakness in the frame.