ScrapBox WorkBox 3.0 Assembly Manual
Text of ScrapBox WorkBox 3.0 Assembly Manual
We’ve been working hard to bring you a more customer friendly build in 2018
and we need your feedback. After assembling your WorkBox, please email us about
your experience at [email protected].
For this build, there is no companion video tutorial.
For help installing the shelves, please visit this link (case sensitive):
http://bit.ly/ShelfPegs
If you have questions regarding your WorkBox 3.0, please contact us.
USA/CAN (801) 226-2686, M-F 9
All panels must be kept at a 90 (Right Angle)
All bases, lids, and shelves must be installed and kept at a right angle (90 ) with side panels.
Once all pieces are fully connected the design is very strong and will last many years!
IMPORTANT
PLEASE READ BEFORE ASSEMBLY
All panels must be installed at a right angle.
Damage may occur if not properly assembled.
o
90 o
90
o
90
o
90
o
Our furniture is designed to be built with two people.
Please do not try to build alone.
x16
x16
x4
x4
LEFT BOX HARDWARE:
RIGHT BOX HARDWARE:
Door Knob
Bolts
x16
Bolts
Nuts
x16
Nuts
Wheels
Small Base
support pins
x4
MADE IN THE USA
UPDATED: 06/05/2018
The WorkBox 3.0: Assembly Instructions
Phillips Screw Driver
Hammer
10mm wrench
(or socket wrench
with extension)
Rubber Mallet
(included)
Locking
Cams
x16
x16
Posts
1 1/2”
Screws
x4
1 1/2�
CENTER BOX HARDWARE:
LEFT SWING DOOR HARDWARE:
WORK TABLE HARDWARE:
SHELVES INCLUDED:
CLEAR TOTES INCLUDED:
Small Base
Support Pins
x4
Table Legs
Metal
Shelf Holders
For Hinges
13mm Euro Screws
Hinges
Shelf Pegs
Vertical Adjustable
Shelf Hardware
13mm Euro Screws
Right Swing Door Hardware
13mm Euro Screws
Center Box Drawer Hardware
Metal
Hooks
Center Drawer
Name Plates
3/4” table
leg screws
(39) 13” x 13”
(3) 13” x 7 1/2 (Upper Center Box)
(24
LEFT BOX Build on a blanket for best results
1
Left Box: Side 2
Small base support pins
2
Install small base support pins and posts into
BOTTOM of Side 2 as shown.
Install posts into TOP of Side 2 as shown.
Green dowels
Post hole
Locking
Cam hole
Unfinished edge
Pre-drilled
wheel screw
holes
Pre-drilled
angle bracket
holes
Post hole
Divider
screw
hole
Hammer (16) bolts into top of base.
Install (4)
Left Box: Side 1
Small base support pins
Install small base support pins and posts into
Insert Cams into bottom
side of Base and top
side of Lid. Turn Cams
with Allen Wrench
until locked in place.
BOTTOM of Side 1 as shown.
Install posts into TOP of Side 1 as shown.
x2
LEFT BOX
Left Box
Side 1
Use mallet to carefully tap Side 1
into the post holes on Base and Lid.
Insert & use Allen Wrench to lock
2 more Cams on Base.
Repeat for Lid.
BASE
LID
Locki
Be certain each post is secure.
Next, carefully turn box over so that DOOR is facing down.
Be sure that door does not slide off posts.
LEFT BOX
Left Box
Side 1
7
Insert 8 Posts HEAD DOWN
into Post Holes on the edge
of Sides 1 & 2.
8
CAREFULLY Set door over 8 posts.
*Make sure door knob hole is
over Side 1.
DO NOT FORCE onto posts.
Left Box
Side 1
Left Box
Side 1
x8 Posts
Head
Facing Side 2
Divider
LEFT BOX
To secure door,
insert 8 Cams
along both sides of the
interior of the box and
turn with Allen Wrench until
locked in place.
Insert Shelf Pegs in
holes on Side 2.
We recommend placing
pegs as shown.
*Use rubber mallet to gently
tap into peg hole. Be sure
peg is secure.
Insert Shelf Pegs in
holes on Side 1 of Left Box Divider
to match peg placement from
step 10. *Gently tap with rubber mallet
until secure .
L
Next, you will use several shelves as spacers to properly
align and install the Left Box Divider.
Take a moment to locate these shelves:
LEFT BOX
Left Box
Side 1
Left Box
Side 1
3 x 13”
Notions
Shelf
x6
13 x 13”
shelves
x2
Slide divider in and align with
pilot holes on lid and base.
Add shelves as shown.
Once divider and shelves are in place
make sure they fit tightly.
Use a Phillips screw driver to MANUALLY insert
(4) 1 1/2” screws into pilo
CAUTION: Leave the Left Box laying on its side for a future step
and until attaching the Center Box.
LEFT
Swing Door
with
shelves
Remove spacer shelves now and set aside.
LEFT BOX
13mm Euro Screws
x18
14
Turn box onto Side 2.
Install 5 offset hinges to Left Box Side 1
panel using (15) 13mm Euro Screws.
With two people, attach Left Swing Door with Shelves
to Left Box Side 1 using (15) 13mm Euro Screws.
Left Box
Side 1
Barrel faces down
so that short