Control 4 C4-KCB-XX Installation Manual

IMPORTANT! Using this product in a manner other than outlined in this document voids your warranty. Further, Control4 is NOT liable for any damage incurred with the misuse of this product. See “Troubleshooting.” IMPORTANT! Do NOT use a power screwdriver to install this device. If you do, you may overtighten the screws and ...

instructions, see the Bus Power Supply Installation Guide. Operation and Configuration On initial power up, all status LEDs on the keypad will illuminate green, indicating that the device has power. Until the keypad has been configured into a Control4 system, it will not control ...

Figure 3. Two Chains - Gateway and Power Supply Centrally Located Between Chains Figure 4. Two Chains - Gateway and Two Power Supplies Centrally Located Between Chains Bus Ethernet Gateway To Keypads Max 40 Keypads Max 1000ft Bus Power Supply GND D_ D+ V+ GND D_ D+ V+ GND ...

the United States and/or other countries. All other names and brands may be claimed as the property of their respective owners Pricing and specifications are s ...