Flowserve NAF Duball DL User Instructions

Text of Flowserve NAF Duball DL User Instructions

NAF Duball DL Ball Valves NFENIM4163-00-A4 05/17

flowserve.com Installation Operation Maintenance NAF Duball DL Pocket Valve FCD NFENIM4163-00-A4 05/17 Experience In Motion USER INSTRUCTIONS

NAF Duball DL Ball Valves NFENIM4163-00-A4 05/17

Contents SAFETY 2 1 General 2 2 Lifting 3 3 Receiving Inspection 3 4 Installation 3 5 Operating sequence 4 6 Commissioning 6 7 Operation 6 8 Bill of Materials and recommended spare part kits 7 9 Ordering of spare parts 8 10 Maintenance 8 10.1 Removing the valve from the pipework 8 10.2 Disassembling the valve for inspection and replacement of ball, seats and stem packing 8 10.3 Reassembly of th

NAF Duball DL Ball Valves NFENIM4163-00-A4 05/17

flowserve.com Incorrect installation Correct installation Figure 1: Schematic lifting of a valve with mounted actuator. Note that the final lifting of the valve into a vertical pipe requires different lifting points. 2 Lifting All lifting must be carried out on the valve itself and not on the actuator. The mounting connection between the valve and the actuator is designed principally for carrying the opera

NAF Duball DL Ball Valves NFENIM4163-00-A4 05/17

Figure 3: Mounting of the Pocket Valve in a Sand Separator application Outlet with liquor Duball DL ball valve Body flushing connection 1 Ball flushing connection 2 Pocket valve Drain/mud/sand Inlet with liquor 5 Operating sequence The NAF Duball DL Pocket Valve is operated by the following sequence: 1. The Pocket Valve is in “Filling mode”. Sand/debris is collected in the Pocket ball. 2. When the Po

NAF Duball DL Ball Valves NFENIM4163-00-A4 05/17

flowserve.com Figure 4: Schematic figure of the Pocket Valve operating sequence 1 2 Sequence no. 1 2 3 4 5 6 7 Sequence description. Filling mode Discharge sequence starts with CCW rotation CCW rotation continues Final discharge position is reached - rotation stops Dischar

NAF Duball DL Ball Valves NFENIM4163-00-A4 05/17

6 Commissioning Before starting up, flush the pipework and run a discharge sequence, assuming the sequence is set according to “Operating sequence” above. This allows any impurities that may damage the sealing surfaces of the valve or impede its operation to be flushed away. 7 Operation The NAF Duball DL Pocket Valve is installed to safely remove sand/ debris out of the process as effectively as possib

NAF Duball DL Ball Valves NFENIM4163-00-A4 05/17

flowserve.com Table 2: Bill of Materials and Recommended Spare Parts Kits Item Qty Part Kit A Stem sealing kit Kit D Seat and ball kit Kit E Seat seal kit 1 1 Body, main 2 1 Body, cover 3 1 Pocket Ball X 4 2 Seat ring X 5 1 Stem 6 1 Circlip X 7 1 Cover 8 1 Spring X 9 1 Washer X 10 1 Stem packing X 11 1 Washer X 12 1 Bushing X 1) Quantity depending on size of the valve. Material and design o

Flowserve Control Unit Owners Instructions: