AMPLITUDE SCORE Surgical Technique

Primary Total Knee System Mobile bearing Surgical Technique With Navigation 4-in-1 Instrumentation ...

• The SCORE® TKS is a PCL-sacrificing, mobile bearing implant in rotation for primary knee arthroplasty. • The stability is provided by sagittal and frontal congruency through the extension to the flexion. • The SCORE® TKS is available in cemented and cementless version. • The SCORE® AS TKS is coated with Titanium Nitride (TiN) to minimise allergic reactions (cemented components only). ...

Overview of SCORE® / SCORE® AS TKS Anterior cut at 6° Component in Cobalt Chrome. Dual coated cementless component (80 μm plasma- sprayed titanium + 80 μm HAP). Cemented* component is micro-blasted. * SCORE® AS femoral component in Cobalt Chrome, coated with 4 μm Titanium Nitride (TiN). Cemented component only. Thickness: 8 mm Articulating surface with mirror finish Trochlear groove is offset laterally by 6° allowing a bette ...

Overview of SCORE® TKS 2. Tibial component: Rotative mobility of the tibial insert: Thickness: 8 mm UHMW PE component Congruency of the femoral component with tibial insert in extension Lateral chamfers Cylindrical and conical plug Central spinal massif ü medio-lateral and saggital stability Large anterior chamfer Thickness: 8,5 mm Thickness: 7 mm Resurfacing patella with cement Insert ...

Tibial baseplate: SCORE® / SCORE® AS Anatomical coverage in rotation (mobile insert) - Tibial extension stems: - Ø 10 to 16 mm - Length 75 to 200 mm Possibility of using (e.g. in cases of uni revision, or TKA, or after osteotomy): - Tibial half-wedges: - Thickness 5 mm - Thickness 10 mm - Thickness 15 mm - Offset connectors: - 2 mm - 4 mm - 6 mm Mirror polish finish contact surface with mobile insert Component in Cobalt Chrome. ...

3. SCORE® implant product range: • Femoral components: - Cemented condyles: 7 sizes - Uncemented condyles: 7 sizes • Patellar components: - Resurfacing patella with cement: Ø 30, 33 and 36 mm - Inserted patella cemented: Ø 23, 26 and 29 mm - Inserted patella cementless: Ø 23, 26 and 29 mm • Tibial components: - Cemented tibial baseplate: 7 sizes - Uncemented tibial baseplate: 7 sizes Δ AP: increment between ...

Femoral component & insert size Tibial baseplate size S1 S1 S2 S2 S3 S3 S4 S4 S5 S5 S6 S6 S7 S7 Overview of SCORE® TKS The SCORE® femoral implant is compatible with the whole range of patellar implants. ...

handles Camera head positioning handles Carry handles (both sides) Carry handles (both sides) Speakers (both sides) Laser control buttons (bilateral) LCD touch screen 22’’ LCD touch screen USB ports V2 Workstation V3 Workstation Front: Laser pointer Laser pointer Optical sensors Optical sensors Status lights Status lights USB ports Speakers Power button ...

Power cord alimentation Rear ports Rear ports On/Off switch V2 Workstation V3 Workstation Rear: Tower locking handles Vent Tower unlocking handle Vent Camera head tightening knobs Power cord holder ...

Pedals for V3 Workstation Rear Rear Storage area for pedal and workstation cover Storage area for pedal and workstation cover Preparation phase Shipping case for V2 Workstation Shipping trunk for V3 Workstation ...

• Open the front panel and take out the workstation, pedal and pedal cover. • Place the workstation on a stable table or operating room cart. • Clean the workstation according to the instructions in the user manual or in the software. NOTE: - The workstation user manual is found in the shipping trunk. - It is also available under the ≪Options Menu≪ function in the software (s ...

• Set the camera head in neutral position (maximum height, no rotation). • Unlock the adjustable tower: lift the locking lever and let the tower rise freely until it reaches its maximum height. • Press the power button: - V2 Workstation: move the green button on rear of workstation to « I » position; - V3 Workstation: press the power button at lower ...

Information area and buttons Yellow pedal: indicates action carried out when pedal is pressed Blue pedal: action carried out when pedal is pressed Menu: Options Visibility of each array: Green - visible Red - not visible Indicates if pointer can be used as a mouse on screen Screenshot capture button Active area ...

The «Exit Application» button will only be active during the final step. To exit the application before the final step, go to the «Options» menu to select it. Show camera field of view to locate arrays Display gaps between tibial cut and virtual femoral component Display gaps between tibial cut and femoral cut Return to proximal tibial cut navigation step Return to distal femoral cut navigation step View all the validated st ...

• Select «Knee», then select the ANATOMIC® implant and the 4-in-1 protocol. • On the «Information» page, input the required information using the virtual keyboard. - Surgeon name - Patient name - Patient date of birth (optional) - Operated side (select right or left) • To go to the next step, press the blue pedal or the blue arrow on the screen. • To go to ...

18 Marker Spherical Markers Release button Array Fixation pins Femur Femur array Tibia array Fixation pins Array fixation support ...

- 3 for the Tibia (T) array - 3 for the Femur (F) array - 4 for the Pointer (P) array - 3 for the Guide (G) array • The pins must be placed on the anteromedial side of the femur and tibia (when the surgeon stands on the lateral side) and must not interfere with tap placement. They can be inserted either percutaneously or through an incision. NOTE: If the femoral pin is being inserted percuta ...