Fortinet FortiADC 1000F Quick Start Manual

Register your Fortinet product to receive: • Technical Support • New product features • Protection from new threats Vous devez enregistrer le produit pour recevoir: • Support technique • Nouvelles fonctionnalitées du produit • Protection contre de nouvelles menaces La reistrazione ti permette di usufruire di ...

Hostname T1/E1, Static broadband, Cable, or DSL with a static IP Cable Modem DHCP It is normal to not require a hostname but your ISP may require it. DSL PPPoE Username Password IP Address Default Gateway Write down details that you may need from your network administrator or ISP. Primary/Secondary DNS Subnet Mask 2 3 FortiADC 1 ...

FortiADC Setup Options 2 Web Browser With Ethernet cable (p.5) Terminal Emulation With console cable (p.6 ) A B Plug the provided power cable into the rear of the appliance, and then into a grounded electrical outlet or a separate power source such as an uninterruptible power supply (UPS) or a power distribution unit (PDU). To conne ...

Cable To Connect to the CLI Requires: Terminal emulator such as PuTTY, Tera Term, or a terminal server. 1. Connect the appliance console port to the management computer using the provided console cable. 2. Start a terminal emulation program on the management computer. Select the COM port and use the following settings: B ...

1. To remove the chassis (inner) member, pull the slide open, and then press the trigger down as shown on the drawing, and pull the chassis (inner) member out. 2. Use the standoffs to mount the chassis (inner) member to the chassis. 3. To attach the cabinet (outer) member to the rail, first ensure ...

your thumb. 6. Verify that the transceiver is latched correctly by grasping the sides of the transceiver and trying to pull it out without lowering the extraction lever. If the transceiver cannot be removed, it is installed and latched correctly. If the transceiver can be removed, reinsert ...

Gigabit Ethernet RJ-45 ports for connections to your network 2 x USB Ports Reserved for future use 8x SFP Ports 1-8 Gigabit Ethernet SFP ports for connections to your network 4x SFP+ Ports 17-20 10G Ethernet SFP+ ports for connections to your network Console Optional connection to the management computer. Provides acc ...

redundant power supply Grounding Screws Provides extra grounding Device Guide Power Supply Warning Buzz Reset Button To disable power supply warning buzz ESD Anchor For user connection to their ESD wrist band Power Switch To turn the power ON/OFF ...

Off: The unit is OFF Status Off: System is normal Green: Minor system alarm Red: System failure HDD Status Flashing Amber: HDD in use MGMT Link/Activity (Left) Flashing Amber: Transmitting & receiving data Off: Port is not in use MGMT Speed (Right) Amber: Port is connected at 1Gbps Green: Port is connected at ...