AAT C-max Operation & User’s Manual

The company AAT Alber Antriebstechnik GmbH herewith declares that the products of the stair climbing system C-max were developed and manufac- tured in concordance with the current regulations of the European Union, EEC Guidelines 93/42/EWG. This declaration becomes void if the above mentioned devices have been al- tered without t ...

CE Declaration of conformity . . . . . . . . . . . . 2 Table of contents . . . . . . . . . . . . . . . . . 3 1 General information. . . . . . . . . . . . . . . . . . . . . 5 1.1 Instruction . . . . . . . . . . . . . . . . . . . . 5 1.2 Care and maintenance . . . . . . . . . . . . . . . 5 1.3 Warranty and liability. . . . . . . . . . . . . . ...

25 7.1 Battery pack . . . . . . . . . . . . . . . . . . . . 25 7.2 Exchange the battery pack . . . . . . . . . . . . . 25 7.3 Charging cable for your vehicle . . . . . . . . . . . 25 8 Care and maintenance . . . . . . . . . . . . . . . . . . . 26 8.1 Charger . . . . . . . . . . . . . . . . . . . . ...

a device that will quickly become a reliable and indispensable partner in transporting physically disabled people. With the C-max you are able to transport persons safely and effortlessly up- and downstairs; even winding stairs are no problem for the C-max. Dri ...

2.1 Adequate use Please use the C-max exclusively for the transportation of physically disab- led persons. Said persons should be able to sit properly without help, otherwise you should secure them with a safety belt. The latter is an accessory available at AAT Alber Antriebstechnik GmbH. In addition, the arms of the person to be ...

1 = control unit 2 = handles, adjustable 3 = back rest 4 = arm rest, swivels out 5 = C-part plus seat 6 = climbing frame 7 = foot rest, folds in 8 = main wheel 9 = lever with chain drive 10 = climber and climbing foot 11 = safety brake 12 = power unit 13 = battery pack 14 = tightening knobs for the back rest 15 = single step switch ...

tures and tightening knobs. Disassembly is just as easy. 3.1 Attach the back rest to the climbing frame Put the back rest onto the guide pins on top of the climbing frame. 3.2 Affix the back rest Fix the back rest tightly to the climbing frame with the two tightening knobs. � ...

unit's housing. Lock the connector by pushing up the latching. � Be catious that neither connector nor socket become wet by e.g. wa- ter or snow - this may cause a short circuit between pins and result in severe malfunction of the system 3.6 Attach the battery pack Pu ...

� Please always make sure that the stop bolts snap in their appropriate notches. 3.9 Handles Adjust handles to the appropriate height � on both sides (see chapter 6.7) then fasten them with the tightening knobs �. � After adjusting the handles, always make sure that they are securely fastened. 10 C-max ...