Axis S10 Installation Manual
Text of the manual
AXIS Camera Station S10 Recorder Series
AXIS Camera Station S1032 Mk II Recorder
AXIS Camera Station S1048 Mk II Recorder
Installation Guide
all-guides
com
Video and audio surveillance can be regulated by laws that
vary from country to country. Check the laws in your local
region before using this product for surveillance purposes.
This product is subject to US EAR export control regulations.
You should always consult and comply with the regulations
of the appropriate export control authori
AXIS Camera Station S10 Recorder Series
Safety Information
Read through this Installation Guide carefully before installing the product. Keep the Installation
Guide for future reference.
Hazard Levels
DANGER
Indicates a hazardous situation which, if not avoided, will result in death or serious injury.
WARNING
Indicates a hazardous situation which, if not avo
AXIS Camera Station S10 Recorder Series
Safety Instructions
WARNING
• The Axis product shall be installed by a trained professional.
CAUTION
• Be careful of sharp metal edges. Use cut-resistant gloves during installation.
NO
NO
NOTICE
TICE
TICE
• The Axis product shall be used in compliance with local laws and regulations.
• Store the Axis product in
AXIS Camera Station S10 Recorder Series
Installation Guide
This Installation Guide provides instructions for installing AXIS S1032 Mk II and AXIS S1048 Mk II.
For other aspects of using the product, go to www.axis.com
Installation Steps
1.
Make sure the package contents, tools and other materials necessary for the installation
are in order. See page 5 .
2.
S
AXIS Camera Station S10 Recorder Series
Hardware Overview
Front Panel S1032 Mk II
1
Power button, power light
2
NMI button
3
System identification button
4
Video connector
5
LCD menu buttons
6
LCD panel
7
USB management port
8
USB connector
9
Information tag
10
Hard drive slots
6
all-guides
com
AXIS Camera Station S10 Recorder Series
Back Panel S1032 Mk II
1
Serial connector
2
vFlash media card slot (optional)
3
Not used
4
PCIe expansion card slots (2)
5
Power supply unit (PSU1 and PSU2)
6
USB 3.0 connectors (2)
7
Ethernet connectors
8
System identification button
9
System identification connector
10
Video connector
Front Panel S1048 Mk II
1
Power
AXIS Camera Station S10 Recorder Series
2
NMI button
3
System identification button
4
Video connector
5
LCD menu buttons
6
LCD panel
7
USB connector
8
Information tag
9
Hard drive slots
Back Panel S1048 Mk II
1
vFlash media card slot (Optional)
2
Not used
3
PCIe expansion card slots (5)
4
Serial connector
5
Video connector
6
Ethernet connectors (2)
7
USB con
AXIS Camera Station S10 Recorder Series
Connect the Cables
Important
Before you begin any of the procedures in this section, read the safety information that
shipped with your computer. For additional information, seewww.axis.com
Note
Some devices may not be included if you did not order them.
1.
Connect the keyboard, mouse and monitor. The connectors on the
AXIS Camera Station S10 Recorder Series
3.
Secure the power cables by bending the system power cables, as shown in the illustration,
and attach to the cable straps. Plug the other end of the power cables into a grounded
electrical outlet or a separate power source such as an uninterruptible power supply
(UPS) or a power distribution unit (PDU).
4.
Press the