Falltech EcoAnchor Operation & User’s Manual
Text of the manual
Instructions for EcoAnchor
Counterweight Anchor
Alexander Andrew, Inc. (dba FallTech)
1306 South Alameda Street
Compton, CA 90221, USA
1-800-719-4619
1-323-752-0066
www.falltech.com
Table of Contents
1: Warnings and Advisories
2: Fall Protection Basics – ABCD’s2.1:
Anchorage
2.2: Body wear
2.3: Connectors/Connecting
devices
2.4: Deceleration devices
2.5: Fall Arrest
2.6: Fall Restraint
2.7: Work Positioning
2.8: Free-fall
2.9: Clear-fall
2.10: Swing-fall
3: Use and Limitations
3.1: General Guidelines
3.2: Approved appl
Authorized Person - a person who is exposed to fall hazards during the course of
their work. This individual requires formal training in the use of personal fall
protection equipment and systems. The term Authorized Person may be used
interchangeably with User and End-User.
Competent Person – a trained and experienced person who is designated to
supervis
Don’t use this device if you are pregnant, a minor, or have a reduced tolerance to fall forces
by reason of age, physical medical condition, or other pre-existing disorders.
Don’t use this device if you weigh less than 75 lbs.
Don’t use this device if your total combined weight (body, clothes, tools, etc) exceeds 425
lbs.
Don’t attemp
It is absolutely critical that you be familiar with the proper wear and/or use of each
component of your Personal Fall Arrest System (PFAS). Failure to read, understand
and adhere to instructional materials and warnings provided with each of these
components could lead to a catastrophic failure of your PFAS, resulting in serious injury
or death.
2.1: Ancho
harness and a self-retracting lifeline, shock-absorbing lanyard or other deceleration
device designed to bring a falling user to a stop in the shortest possible distance while
limiting the force imparted to the user’s body.
2.6: Fall Restraint
Fall Restraint is an area of Fall Protection devoted to restraining the user of the
system in a manner which
See figure 2.1 on the next page for a graphic illustration of Clear-Fall Distance and the
method for calculating. It is also necessary to consider the fall path when determining
the Clear-Fall limitations in your application. Ensure the fall path is clear of obstructions,
protrusions, equipment or materials that may be a hazard in the event of a fall. Pa
serious injuries (see figure 2.2). A significant Swing-Fall may also require increased
Clear-Fall distance. As a rule of thumb, you should ensure work in an area that does not
exceed an angle greater than 15 degrees in any direction from your anchorage.
Figure 2.2: Swing-Fall Diagram
Be sure to consider Swing-Fall when calculating your Clear-Fall req
Before using this product, the user should be trained in the use of fall arrest products
and should have completed a minimum course of instruction (4-8 hours) for Authorized
Person Training as outlined in ANSI Z359.2-2007. The user must also read and be
familiar with all of the material contained in this instruction manual as well as all labels
and warnings