Dell Aurora R7 Installation Manual

Installation Guide Computer Model: Alienware Aurora R7 Regulatory Model: D23M Regulatory Type: D23M001 ...

NOTE: A NOTE indicates important information that helps you make better use of your product. CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. WARNING: A WARNING indicates a potential for property damage, personal injury, or death. © 2018 Dell Inc. or its su ...

Before you begin ............................................................................................................................................................... 4 Safety instructions.... ...

NOTE: The images in this document may differ from your computer depending on the configuration you ordered. Topics: • Before you begin • Safety instructions • Recommended tools Before you begin 1 Save and close all open files and exit all open applications. 2 Shut down your computer. Windows 10: Click or tap Start > ...

Recommended tools The procedures in this document may require the following tools: • Philips screwdriver #1 • Flat-head screwdriver • Plastic scribe Before working inside your computer 5 ...

NOTE: Ensure that you remove the security cable and security screw from the security-cable slot—if applicable. 1 Remove the screw (#6-32 X 1/2") that secures the side-panel release latch to the chassis. 2 Pull the side-panel release latch. 3 Release the left-side cover away from the chassis and then lift it from the com ...

1 data cable 2 power cable 3 hard-drive cage 4 release tabs 5 hard-drive carrier 7 Place the U.2 solid-state drive in the hard-drive carrier and align the tabs on the carrier with the slots on the U.2 solid-state drive. Figure 3. Assembling the U.2 solid-state drive 1 hard-drive carrier 2 fan cable Installing the U.2 solid-s ...

8 Slide the U.2 solid-state drive assembly into the hard-drive cage until it snaps into place. Figure 4. U.2 solid-state drive assembly 1 solid-state drive assembly 2 chassis 9 Slide the power-supply unit cage release latches towards the unlock position. Figure 5. Sliding the power-supply unit cage release latches 1 power-supply unit ...

1 power-supply unit cage 2 graphics-card bracket 3 chassis 11 Rotate the power-supply unit cage away from the chassis. Installing the U.2 solid-state drive 9 ...

1 power-supply unit 12 Lift to release the graphics-card bracket from the chassis. 10 Installing the U.2 solid-state drive ...